Kuschall K-SERIES Service Manual - page 11
11
KÜSCHALL K-SERIES
attract
© Küschall AG, Switzerland | 2014-12
Service Manual
SEAT
Tipping point adjustment
The tipping point of the wheelchair can be adjusted by changing the
horizontal position of the seat module.
Difficulty:
Tools:
à 4, 5
Remove the rear wheels, fold the backrest forward
and place the wheelchair on its back.
Remove all screws on one side that hold the seat
cover to remove tension.
Loosen the screws A, B and E on both sides.
Remove the screws C and D and slide the seat
module forwards or backwards.
Reposition all screws (A, B, C, D and E) but do
not tighten them.
Reattach the seat cover and tighten the screws.
Tighten all screws (A, B, C, D and E) alternately
and uniformly on both sides.
There are 4 possible positions for the rear bracket and
4 possible positions for the front bracket.
Make sure to choose the corresponding position front to back.
i
Note: ensure that the seat brace
F is as vertical as possible
following an adjustment.
A
à7 Nm
B
à7 Nm
C
à7 Nm
D
à7 Nm
E
à13 Nm