La Crosse Technology Wireless Weather Station Instruction Manual - page 7
25
Note: When set to 24-hour time, the calendar setting mode will display
the date to the left of the month.
The date default of the Weather station is 1. 1. 2006. Once the radio-
controlled time signals are received, the date is automatically updated. If
the signals are not received, the date can also be set manually.
1.
The year starts flashing.
2.
Use the OUT/+ key to set the year (between year 2003-2029).
3.
Press the SET key again to confirm and to enter the month setting.
The month starts flashing.
4.
Use the OUT/+ key to set the month.
5.
Press the SET key again to confirm and to enter the date setting
mode. The date starts flashing.
6.
Use the OUT/+ key to set the date.
7.
Confirm all calendar settings with the SET key and enter the
Temperature unit setting.
Note: The Day of the Week will set automatically when the year, month
and date are set.
Month and date
(12hr time format)
Date and month
(24hr time format)
26
°C/°F TEMPERATURE SETTING:
The temperature display can be selected to show temperature data in °C
or °F (Default °F).
1.
Use the OUT/+ key to toggle between “°C” or “°F”.
2.
Confirm with the SET key and enter the Air pressure unit setting.
AIR PRESSURE UNIT SETTING (hPa / inHg):
The pressure display can be selected to show relative air pressure in hPa
or inHg (default is “inHg”).
1.
Use the OUT/+ key to toggle between “hPa” or “inHg” unit
2.
Confirm with the SET key and enter the Relative air pressure
value setting.
Flashing
Flashing
27
Note:
Units of weather icon sensitivity and air pressure history are not affected.
They are always expressed in hPa.
RELATIVE AIR PRESSURE VALUE SETTING
The default relative pressure value is 29.92 inHg (1013 hPa). This can be
manually set to another value within the range of 28.35 – 30.72 inHg (960
– 1040 hPa) for a better reference.
1.
The current relative pressure value will start flashing
2.
Use the OUT/+ key to increment and IN key to decrement the
value. Holding the key allows the value to advance faster.
3.
Confirm with the SET key and enter the Weather forecast icon
sensitivity setting.
Flashing
28
WEATHER FORECASTING ICON SENSITIVITY SETTING:
For locations with rapid changes of weather conditions, the weather icons
sensitivity can be set to a different level for faster display of weather
conditions.
1.
The current sensitivity value will start flashing.
2.
Use the OUT/+ key to set the weather sensitivity level. There are 3
levels of setting: 2, 3 and 4. The value corresponds to the change
of air pressure in hPa before the weather icon will switch to another
state. Level 2 is the most sensitive setting (coastline); level 4 is the
slowest (desert) recording setting (default setting is "3").
3.
Confirm with the SET key and exit the Manual settings.
Flashing