Labrie expert 2000 Operator's Manual - Green Start Cycle
23
Expert(t) 2000
TM
Operator Manual
Green Start Cycle
Button
The green
S
TART
C
YCLE
button activates
the packer for a full cycle. A full
packing cycle lasts approximately
15 seconds with the engine running in
speed-up mode.
Note:When the multi-cycle feature
is activated, the green button
activates the packer for the
number of cycles defined on
the multi-cycle module. For
more information, see
“Changing Packer Multi-cycle
Settings” on page 44.
Figure 7. Green button
Yellow Retract Button
The yellow
R
ETRACT
button activates the
packer for a retract stroke to bring it
back to the home position. This control
is very useful when the body is full and
the load in the body does not allow the
packer to reach the end of its extend
stroke.
Figure 8. Packer Retract button
Packer
Start Cycle
button
Packer Retract
button