Labrie expert 2000 Operator's Manual - page 54
46
C
HAPTER
3
Operating the Expert(t) 2000
TM
The floor riser has hinges on the rear
side allowing you to raise and fold it in
vertical position, especially for cleaning
purposes. Labrie recommends the use
of this aluminum platform in its
horizontal position at all times when
driving from the right-hand side.
The height of the floor riser can be
adjusted to either raise or lower your
standing position.
To deploy the floor riser:
1.
When in vertical position,
release the latch. (See “Floor
riser in both horizontal and
vertical positions” on page 46.)
Figure 35. Floor riser in both
horizontal and vertical positions
2.
To use the floor riser as is, skip
to step 3.
If you need the extra height, hold
the floor riser with one hand and
stretch the legs with the other
hand.
3.
Pull the floor riser down to its
horizontal position.
Latch
Legs