Labrie expert 2000 Operator's Manual - Changing Driving

33

Expert(t) 2000

TM

Operator Manual

Figure 16. Mirror adjustment

Changing Driving 

Position

Labrie recommends to drive the 

Expert(t) 2000

TM

 from the left-hand side 

driving position all the time, except 

when door-to-door collecting; where 

you use the right-hand side driving 

position due to the systematic 

stop-and-go sequence.

There are several safety issues 

involved when you change driving 

positions and Labrie recommends the 

following procedure.

To change driving positions:

1.

Stop the vehicle and apply the 

parking brake.

2.

Turn off the 

P

UMP

 switch.

3.

Turn off the engine.

4.

Move to the desired driving 

position (left or right).

5.

Turn the 

D

RIVING

 P

OSITION

 control 

switch to the desired position 

(left or right).

Figure 17. Driving Position switch

6.

Adjust the mirrors to ensure an 

adequate view scope from the 

selected driving position. For 

more information, see Adjusting 

Mirrors.

Note:When changing to the 

right-hand side driving 

Driving Position 

switch