Lancia Musa Owner's Handbook Manual - page 31
30
SAFETY
ST
AR
TING
AND DRIVING
W
A
RNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICAL
SPECIFICA-
TIONS
INDEX
DASHBOARD
AND
CONTROLS
Unlocking the doors and the
tailgate (key)
This function is used to: unlock the
front and rear doors, unlock the dri-
ver’s side door or all the doors includ-
ing the tailgate.
Proceed as follows to set:
– briefly press button MODE: “Open
doors”, “Open driver”, “Open all”;
– press button + or – to select. The se-
lected item will blink.
– briefly press button MODE to go
back to the menu screen or hold the
button pressed to go back to the stan-
dard screen without storing the set-
tings.
– briefly press MODE: “month” will
start flashing on the display;
– press button + or – to set;
– briefly press button MODE: “day”
will start flashing on the display;
– press button + or – to set.
Note The setting will increase or de-
crease by one unit each time + or – is
pressed. Hold the button pressed to in-
crease/decrease the setting rapidly.
Complete the setting by briefly press-
ing the button when you approach the
required setting.
– briefly press button MODE to go
back to the menu screen or hold the
button pressed to go back to the stan-
dard screen without storing the set-
tings.
12h/24h clock mode
This function is used to select 12h or
24 h display.
To carry out the adjustment, proceed
as follows:
–briefly pressMODE: either 12h or
24h will start flashing on the display
(according to the previous setting);
– press button + or – for setting;
– briefly press button MODE to go
back to the menu screen or hold the
button pressed to go back to the stan-
dard screen without storing the set-
tings.
Set date
This function is used to set the date
(year – month – day).
Proceed as follows to update:
– briefly press button MODE: “year”
will start flashing on the display;
– press + or – to adjust;