Lanier 5484 Operator's Manual - Border Erase
Copying
132
2
Border Erase
Limitation
❒ This function will not take effect if the size of the original cannot be detected.
Note
❒ You can change the width of the erased margin as follows:
Note
❒ The default width of the erased margin is as follows. You can change this set-
tings with the User Tools. See “Border Erase Width”
❒ .
❒ The width of the erased margin varies depending on the reproduction ratio.
❒ If the size of the original is different from sizes listed in the following chart,
the erased margin might be shifted.
❖
Metric version
*1
You can select from 8
1
/
2
"
×
13", 8
1
/
4
"
×
13" and 8 "
×
13" with the User Tools (Sys-
tem Settings). See “Original: F/F4 Size Setting” in the System Settings manual.
Metric version
3 – 50 mm (in 1 mm steps)
Inch version
0.1" – 2.0" (in 0.1" steps)
Metric version
10 mm
Inch version
0.4"
Where Original Is Set
Paper Size and Orientation
Exposure glass
A3L, B4L, A4KL, B5KL, 8
1
/
2
"
×
13"L
Document feeder
A3L, B4L, A4KL, B5KL, A5KL, B6KL, 11"
×
17"L, 11"
×
15"L, 8
2
/
1
"
×
11"KL, 8
1
/
2
"
×
13"L