Lanier 5484 Operator's Manual - page 92

Copying

78

2

C

Enter the length of the original with the number keys and press the 

[#]

 key.

Note

❒ You can enter sizes within the following ranges:

❒ To change the length entered, press the {

Clear

} key on the control panel or

[Clear]

 key on the display and enter the new length.

D

Enter the length of the copy with the number keys and press the 

[#]

 key.

Note

❒ To change the length entered, press the {

Clear

} key on the control panel or

[Clear]

 key on the display and enter the new length.

❒ To change the length after pressing the 

[#]

 key, select 

[Original]

 or 

[Copy]

 key

and enter the desired length.

E

Set your original, then press the {

Start

} key.

Metric version

1 - 999 mm (in 1 mm steps)

Inch version

0.1" - 99.9" (in 0.1" steps)