Lanier 5484 Operator's Manual - page 191
Manual is about: Lanier Digital Copier Operator Manual
of
368
User Stamp
177
2
C Enter the user stamp name with the letter keys on the display panel.
Then press the
[#]
key.
Note
❒ You can register up to 8 characters.
❒ To change the name entered, press the
[Clear]
key and enter new letter.
D Press the
[OK]
key.
E Enter the vertical and horizontal size of the stamp with the number keys.
Then press the
[#]
key.
Note
❒ To change the value entered, press the {
Clear
} key on the control panel
or
[Clear]
key on the display and enter the new value.
❒ You can enter sizes within 100
×
200mm, 3.9"
×
7.8".