Lanier 5484 Operator's Manual - Using Connect Copy

Connect Copy (Option)

246

4

Using Connect Copy

You can select Connect Copy mode from either of the two connected machines

by pressing the 

[Connect]

 key. The machine you use becomes the master unit,

and the other machine the sub-unit.

Limitation

❒ Once Connect Copy is selected, you must carry out all operations on the mas-

ter unit.

A

Make sure the machine is in copy mode.

Note

❒ If user codes are turned on, enter a user code programmed in the master

unit with the number keys (up to 8 digits) then press the 

[#]

 key. You don't

need to enter the user code for the sub-unit.

Reference

See 

⇒

 P.70 “User Codes”.

B

Press the 

[Connect]

 key on the machine that is to be the master unit.

When the key darkens, the two machines are connected.

❖

Master unit display