Lanier 5484 Operator's Manual - E Removing Jammed Staples

What to do if Something Goes Wrong

302

5

e Removing Jammed Staples

Note

❒ Staples might be jammed because of curled copies. In this case, try turning the

copy paper over in the tray. If there is no improvement, change to copy paper

with less curl.

❒ After removing jammed staples, staples might not be ejected the first few

times you try to use the stapler.

• 1: Open the front cover of the finisher 

and pull lever R9 down.

• 2: Pull lever R8 and fully pull out the 

staple unit.

• 3: Turn knob R9 until the marks are 

aligned.

• 4: Pull out the staple unit lever.

• 5: Pull out the staple unit gently.