Lanier 5484 Operator's Manual - Exiting Connect Copy Mode

Using Connect Copy

251

4

-Auto Off

The machine turns itself off automatically a certain period of time after your job

has finished. This function is called “Auto Off”.

Note

❒ The Auto Off function is available only for the main unit.

Reference

See “Auto Off Timer” in the System Settings manual.

Exiting Connect Copy Mode

A

Press the 

[Connect]

 key on the master unit.

The 

[Connect]

 key will be deselected.

Note

❒ Settings which were selected on the master unit while in Connect Copy

mode will not be cleared.

❒ Press the {

Clear Modes

} key to cancel the master unit settings and return to

the initial state.

❒ The sub-unit will return to the state which is before entering Connect Copy

mode.

Reference

If you cannot exit Connect Copy mode, see 

⇒

 P.269 “If You Cannot Exit

Connect Copy”