Lanier JP1030 Operator's Manual - page 112

Remarks

100

6

• Under the following conditions, the machine might not detect the original on

the exposure glass. If you press the 

{{{{Start}}}} key again, the machine will start

making a master anyway:

• When you set a dark original on the exposure glass.

• When the original is not centered according to the size marks on the right

scale.

• If you do not open the exposure glass cover at an angle of more than 25 de-

grees with the exposure glass when you replace originals.

• If the machine is installed under a strong light.

PinkGold-F_V4_FM.book  Page 100  Tuesday, September 11, 2001  6:31 PM