Lanier JP1030 Operator's Manual - Standard Printing

Standard Printing

13

1

Standard Printing

The operations are different depend-

ing on whether you use Auto Cycle

mode or not. With this mode, the ma-

chine can process masters and make

prints at one stroke. The default set-

ting of this mode is on. You can

change the default setting. See “15.

Auto Cycle Mode” on 

⇒ p.57 “User

Tools Menu”.

Reference

When you use the optional docu-

ment feeder, see p.46 “Placing

Originals in the Document Feed-

er”.

AAAA

Lift the exposure glass cover.

BBBB

Place the original face down on

the exposure glass. The original

should be aligned to the rear left

corner.

CCCC

Lower the exposure glass cover.

When Auto Cycle is on

A Make sure that Auto Cycle

mode is selected.

B Enter the number of prints

with the number keys.

ZDCH110E

PinkGold-F_V4_FM.book  Page 13  Tuesday, September 11, 2001  6:31 PM