Lanier JP1030 Operator's Manual - Energy Saver Mode
Manual is about: Digital Duplicator
of
128
Energy Saver Mode
17
1
Energy Saver Mode
If you do not operate the machine for a certain period after printing, or when you
press and hold the
{{{{Clear Modes/Energy Saver}}}} key for three seconds, the panel
display turns off and the machine enters Energy Saver mode. When you press
the
{{{{Clear Modes/Energy Saver}}}} key again, the machine returns to the ready con-
dition. In Energy Saver mode, the machine uses less electricity.
See “4. Auto Energy Saving” on p.57 “User Tools Menu”.
PinkGold-F_V4_FM.book Page 17 Tuesday, September 11, 2001 6:31 PM