Lanier JP1030 Operator's Manual - Forward Or Backward

Operation

18

1

Adjusting the Print Image Position

After master making, you can adjust

the print image position to suit your

needs. There are two ways:

❖

❖

❖

❖ Forward or Backward

Use the 

{{{{Image Position}}}} keys.

❖

❖

❖

❖ Right or Left

Use the side tray fine adjusting di-

al.

Forward or Backward

* Paper feed direction

AAAA

Press the left 

{{{{Image Position}}}} key

to move the image forwards, the

right key to move it backwards.

Note

❒ The  {{{{Image Position}}}} keys shift

the image up to 15mm, 0.6" each

way in 0.5mm, 0.02" steps.

When the indicator changes, the

image position shifts about

5mm, 0.2".

❒ When you shift the image for-

wards, leave a margin (more

than 5mm, 0.2") at the leading

edge. If there is no margin, pa-

per might wrap around the

drum and cause a misfeed.

BBBB

Press the 

{{{{Proof}}}} key to check the

image position.

GRFORW0E

PinkGold-F_V4_FM.book  Page 18  Tuesday, September 11, 2001  6:31 PM