Lanier JP1030 Operator's Manual - page 63

Color Printing Using the Optional Color Drum

51

2

CCCC

Pull out the drum unit handle.

Note

❒ If you cannot pull out the drum

unit, push the drum unit han-

dle, then pull out the drum unit.

DDDD

Hold the rail on the drum and

slide out the drum while pulling

the release towards you.

EEEE

Remove the drum unit from the

machine while holding the upper

drum stay.

Note

❒ Be careful not to let the drum

unit fall.

FFFF

Insert the color drum unit along

the guide rail.

GGGG

Slide in the drum unit until it

locks in position.

HHHH

Lower the drum unit lock lever.

IIII

Close the front door.

Note

❒ Make  sure  that  the  open  cov-

er/unit indicator (

M) turns off,

and the “Color” is displayed on

the operation panel.

PinkGold-F_V4_FM.book  Page 51  Tuesday, September 11, 2001  6:31 PM