Loadrite Sprint User Manual - 1.4. Accurate

1-9 

LOADRITE Sprint User manual 

1.4. ACCURATE 

WEIGHING 

For maximum accuracy, ensure that: 

  Check Zero is performed regularly. 

  Load lifting motion is steady and smooth, with no acceleration or bounce. 

  The bucket is fully rolled back during the lift. 

  The loader is on level ground. 

1.4.1. 

Obtaining the Best Weighing Results 

Lifting speed 

For best results, operate the lift lever before accelerating the engine so that the machine does not rock as it lifts, i.e. use normal 

revs. 

Trigger Point 

Start the lift well below the Trigger Point. This ensures that all acceleration and load bounce has been eliminated well before the 

weighing sequence begins. 

NOTE:

 We recommend that there are at least two seconds of lift before the Trigger Point. 

Bounce 

Most loaders have pneumatic tires which can cause the machine to bounce when lifting. 

To minimize the effect of bounce, always operate the lift lever before accelerating the engine and start the lift well below the 

trigger point. 

Center of gravity 

The hydraulic pressure in the lifting cylinders depends on where the center of gravity of the load is. It is important that the bucket 

is always in the same position: fully rolled back.