Loadrite Sprint User Manual - 5.9.2. Uploading
Manual is about: Loader scales
of
36
5-21
LOADRITE Sprint User manual
5.9.2. Uploading
a
configuration file via a LOADRITE Data Module
1) From
the
Uplink Menu
select
Data Module
, then press
.
2) Connect the LOADRITE Data Module containing the configuration file to the Indicator.
3) When
the
Sync Config From Module?
message displays, press
.
A counter will display as the Indicator receives the configuration file.
4) When
the
Delete Config From Module?
message displays, press
.
The configuration file will be deleted from the Data Module.
5.10. STANDBY
This option puts the Indicator into
Standby
mode. The Indicator will also go into
Standby
mode if it is not used for two hours.
Press any button to exit
Standby
mode.