Loadrite Sprint User Manual - 5.6. Display
5-20
LOADRITE Sprint User manual
5.6. DISPLAY
This option allows the display to be configured. The following menu items are available:
5.6.1.
Changing the screen brightness
To change the brightness of the display screen, complete the following:
1) From
the
Display Menu
select
Light
, then press
.
2) Press
or
to adjust the backlight brightness up or down.
3) Press
to save the brightness level.
5.6.2.
Changing the screen contrast
To change the contrast of the display screen, complete the following:
1) From
the
Display Menu
select
Contrast
, then press
.
2) Press
or
to adjust the backlight contrast up or down.
3) Press
to save the contrast level.
5.7. LONG
TOTAL
View and clear the long total for current products.
For more information, (see "View and clear the long total" on page 3-15).
5.8. SELF
TEST
This function tests various functions and the internal memory. All tests are run automatically when this option is selected. When
the test has completed, the
Ready
screen will display.
5.9. UPLINK
This option is used to upload a configuration file created using
LOADRITE Toolbox
via a LOADRITE Data Module or from a PC
via a EDP cable. The configuration file contains product names, data lists and settings.
For information on creating a configuration file, refer to the
LOADRITE Toolbox User Manual
.
5.9.1. Uploading
a
configuration file via a EDP cable
1) From
the
Uplink Menu
select
EDP
, then press
.
The Indicator will enter
Uplink
mode.
2) When the message
Uplink Ready
is displayed, use
LOADRITE Toolbox
to send the configuration file.
The
message
Updating
and a counter will display as the Indicator receives the configuration file.
LOADRITE Toolbox
will display a message to indicate that the upload is complete.
3) Press
to exit
Uplink
mode.