Mackie TT24 Quick Start Manual - 2.9 Tt Control Software
11
Quick-Start Guide
Quick
-Star
t Guide
2.9 TT Control Software
The TT control software expands the control possibili-
ties for the TT24 console by providing:
• Remote control of all TT24 functions from a PC con-
nected via USB.
• Improved metering and graphics than can be seen
on the Touchscreen.
• Remote Show/Venue/Preset management and con-
sole–>console backup/restore.
• Console firmware upgrade capability.
The TT24 connects to the PC via a USB cable (six-ft
cable supplied). The minimum PC requirements are
summarized below.
Table 2-1 Minimum PC Requirements
Screen Resolution Processor Speed Operating System
1024 x 768
600 MHz
Windows 2000 or XP
The main screens of the TT control software mir-
ror and elaborate the Touchscreens. The TT control
screens can be set to operate independently or to track
the Touchscreen. When they are independent, two
users may control the TT24, one from the console and
one from the computer. To adjust this setting from the
Touchscreen (can also be adjusted from TT control):
press the QuickMix
SETUP
button, touch the
GEN-
ERAL
button from the MENU SELECTION screen, then
touch to select
PC AUTO FOLLOW
to synchronize the
TT control software with the Touchscreen (deselect the
checkbox to make them independent).