Mackie TT24 Quick Start Manual - 3.3 Connect A Cd/tape Device
14
TT24 DIGITAL LIVE CONSOLE
TT24 DIGIT
AL LIVE C
ONS
OLE
Engage and adjust the variable high-pass filter
17. Press
HPF
in the V-POT CONTROL area (Figure
3-2). Now the high-pass filter can be adjusted with
the channel V-Pots.
18. Engage the high-pass filter by pressing channel 1’s
V-Pot knob so the bottom red LED lights.
19. Rotate the V-Pot to adjust the filter in the range
20–400 Hz to remove unwanted low frequencies.
3.3 Connect a CD/Tape Device
This section illustrates how to connect a CD/tape
device to the dedicated
CD/ TAPE A
or
B
connectors (A
= RCA, B = TRS), and to channels 23/24 to demonstrate
stereo linking and channel strip processing.
Connect CD to CD/Tape input
1. Connect the CD player into CD/TAPE A or B
(Figure 3-1).
2. Press the
UTIL
button (Figure 3-4).
3. Touch
STEREO INPUT ASSIGN
on the Touch-
screen (Figure 3-6).
4. Touch
TAPE/CD A
or
TAPE/CD B
in the INPUT
SELECTION area (Figure 3-6).
5. Touch to activate
L/R
in the GRP ASSIGN area to
route the mains.
6. Adjust
MUTE
and
SOLO
from the Touchscreen.
7. Adjust the stereo input fader to desired level from
its QuickMix knob.
DYN
EQ
GRP/
AUX
FAT
SETUP
CTRL
COPY
HELP
UTIL
PASTE
STORE
RECALL
EFX
SNAP
AUX
MSTR
MATRIX
SNAPSHOTS
Utility
button
Aux Master button
Figure 3-4 QuickMix area
Aux 1 Master Level
Figure 3-5 Aux Master Screen
Figure 3-6 Stereo input assign