Mackie TT24 Quick Start Manual - 2.2 Banks
8
TT24 DIGITAL LIVE CONSOLE
TT24 DIGIT
AL LIVE C
ONS
OLE
2.2 Banks
The four Bank select buttons on the TT24 change the
function of the 24 channel strips to control the following
groups of channels (Figure 2-2):
ANALOG:
24 analog mic/line inputs
DIGITAL:
There are 24 digital inputs from three ADAT
optical connectors on the rear panel (44.1/48 kHz).
At 96 kHz, there are 12 digital inputs from the three
built-in connectors; another 12 are available from the
optional ADAT I/O expansion card.
RETURNS:
1–8: Eight analog line inputs
9–16: Four internal stereo effects returns
17–24: Eight additional return channels from ex-
pansion card
MASTER:
The masters bank uses the following channels:
1–12: Twelve Aux send masters
13–20: Eight Group masters
22–24: Left, Right, and Center/Mono Main outputs
2.3 V-Pot Control Area
The buttons to the right of the channel faders
(Figure 2-2) selects the current function for the chan-
nel V-Pots from the following:
•
PAN
: Left/Right and LCR panning control
•
TRIM
: Digital Trim has a range of ±15 dB
•
METERS
: High-resolution channel metering. Push
the V-Pot and the meter reverses to display com-
pressor gain reduction. Rotate the knob to control
the threshold settings.
•
HPF
: Push the V-Pot to engage/disengage the
HPF; rotate the knob to adjust frequency between
20–400 Hz.
•
AUX SENDS 1–12
: Rotate the V-Pot to control
send level; push the V-Pot to toggle pre/post fader
for that send.
•
AUX PAN
: Control panning of stereo linked axes
•
AUX MODE
: Aux mode is the only blue button on
the console and effectivelyturns the TT24 into a
powerful, dedicated monitor mixer by providing aux
mixing on the faders. In this mode, the 24 channel
faders act as channel aux sends and the 4 group
faders act as auxiliary master sends.
RETURNS
MASTER
ANALOG
DIGITAL
GROUP ASSIGN/SELECT
MASTER
V-POT
CONTROL
AUX
SENDS
FX1
FX2
FX4
FX3
ANLG
MUTE
DGTL
1
RTNS
5
MSTR
SELECT
PFL
SOLO
MUTE
2
6
SELECT
SOLO
MUTE
3
7
SELECT
SOL
O
MUTE
4
8
SELECT
SOLO
CTR/
MONO
L/R
SELECT
PAN
HPF
AUX
MODE
2
4
6
8
10
12
CLEAR
SOLO
TRIM
METERS
AUX
PAN
1
3
5
7
9
11
Group Assign/Select buttons
Master Center/Mono Assign button
Master Left/Right Assign button
Master Select button
Group Select buttons
V-Pot Control
Aux Sends
Bank Select
Clear Solo and
PFL buttons
Group Faders
p
Group Mute buttons
Master Fader
Group Solo buttons
Aux Mode
AUX
AUX
Figure 2-2 V-Pot Control, Bank Select, Group, Aux and Master sections