MACROZA Diamant D2 Instruction Ma - page 4
4
Tool use and care
Use clamps or other practical way to secure and support the work piece to a sta-
ble platform.
Holding the work by hand or against your body is unstable and may lead to
loss of control.
Do not force tool. Use the correct tool for your application.
The correct tool will do
the job better and safer at the rate for which it is designed.
Do not use tool if switch does not turn it on or off.
Any tool that cannot be controlled
with the switch is dangerous and must be repaired.
Disconnect the plug from the power source before making any adjustments,
changing accessories, or storing the tool.
Such preventive safety measures reduce
the risk of starting the tool accidentally.
Store idle tools out of reach of children and do not allow persons unfamiliar with
the power tool or these instructions to operate the power tool.
Tools are dangerous
in the hands of untrained users.
Maintain tools with care. Keep cutting tools sharp and clean.
Properly maintained
tools, with sharp cutting edges are less likely to bind and are easier to control.
Check for misalignment or binding of moving parts, breakage of parts, and any
other condition that may affect the tools operation. If damaged, have the tool
serviced before using.
Many accidents are caused by poorly maintained tools.
Use the power tool, accessories and blades etc., in accordance with these
instructions and in the manner intended for the particular type of power tool,
taking into account the working conditions and the work to be performed.
Use of
the power tool for operations different from those intended could result in a hazardous sit-
uation.
Service
Have your tool serviced by a qualified repair person using only identical replace-
ment parts.
This will ensure that the safety of the power tool is maintained.
-WARNING-
To reduce the risk of injury, user must read instruction manual.