N&W Global Vending Kobalto Installation Operation & Maintenance - page 39
© by N&W GLOBAL VENDING S.p.A.
35
05-2008 3235-00
PrESELEctIoNS
Use this function to act on the selection-associated
preselections available on a specific model and layout.
tecH>
set paraMeters
tecH>
preselectIons
For every single preselection you can decide whether
to enable it or not, the key for association, the change
in the selection price and the change percentage of the
product dose.
mIScELLaNEoUS
this menu is gathering some less-frequently-used
functions relative to the parameters of the machine.
tecH>
set paraMeters
tecH>
MIscellaneoUs
f
rEsH
brEW
uNiT
DaTa
You can set up the brewing time, the drying time of the
used dose and the extraction pressure for the Fresh
Brew unit.
p
rogrammiNg
passWorD
It is a 5-digit numeric code required to access the pro-
gramming mode.
this code is set to 00000 by default.
p
assWorD
ENablE
Used to enable or disable the function requiring the user
to enter the password for access to the programming
mode. the password request is disabled by default.
c
ouNTEr
rEsET
passWorD
Function used to set the password you shall type in the
normal operation mode (door closed) to reset the selec-
tion counters.
If the password is set to zero, this function is not active.
j
ug
f
aciliTiEs
p
assWorD
enter a password to activate the function necessary to
obtain a number (programmable from 1 to 9.5 by default)
of selections in order to fill in a jug.
m
ulTiplE
DispENsiNg
passWorD
Function used to set the password you shall type in the
normal operation mode (door closed) to dispense sev-
eral selections in consecutive mode (jug facilities).
the function is disabled at the end of the selection.
If the password is set to zero, this function is not active.
f
rEE
salE
passWorD
Function used to set the password you shall type in the
normal operation mode (door closed) to activate the
Free-Vend function.
the function is disabled at the end of the selection.
k
Ey
lock
passWorD
You can set up the password that shall be typed in nor-
mal use (when the door is closed) to activate/deactivate
the keyboard lock.
“serVIce InterrUptIon” will appear on the display
during the lock.
this function is not active if the password is set to zero.
W
asHiNg
passWorD
Function used to set the password you shall type in the
normal operation mode (door closed) to wash the mixer.
T
EsT
sElEcTioN
passWorD
You can set up the password that shall be typed in
normal use (when the door is closed) to access the
maintenance/programming mode and to perform test
selections.
to go back to normal use, switch from the FIll to the
tecH area and vice versa for three times.
f
ilTEr
rEsET
passWorD
Use this function to set up the password necessary to
reset the “Replace the water filter” message when the
door is closed and to reset the corresponding counter
after having replaced the filter.
W
asTE
couNTEr
rEsET
passWorD
Use this function to set up the password necessary to
reset the selection counters for the “empty the waste
tray” lock.
f
illEr
mENu
ENablE
Function used to establish which options of the filler
menu shall be enabled and which of them shall be disa-
bled.
the reference numbers of the menus do not change
even if some of them are disabled.
a
uTomaTic
E
sprEsso
WasHiNg
this function is intended to set up the automatic daily
washing cycle of the espresso unit by setting the time
you wish.
If you set the time to 00:00, the function is disabled.