N&W Global Vending Kobalto Installation Operation & Maintenance - Introduction
© by N&W GLOBAL VENDING S.p.A.
2
05-2008 3235-00
IN caSE oF FaILUrE
In most cases, any technical problem can be solved by
carrying out minor operations. as a consequence, we
suggest carefully reading this manual before contacting
the manufacturer.
In case of failures or malfunctions that can not be solved,
please apply to:
n&W GloBal VenDInG spa
Via roma 24
24030 Valbrembo - BG
Italy - tel. +39 - 035606111
traNSPort aNd StoragE
to avoid damaging the machine, loading and unload-
ing operations shall be performed with great care. It is
possible to lift the machine by means of a motor-driven
or manual lift truck by positioning the forks beneath the
machine.
Please avoid:
-
overturning the vending machine;
-
dragging the vending machine by means of ropes or
alike;
-
lifting the vending machine by its sides;
-
lifting the vending machine by means of slings or ropes
-
shaking the vending machine and/or the package.
For storage it is necessary to keep the room dry at a
temperature between 0 and 40 °c.
You can stack up max. 2 machines, if originally packed.
Never forget to keep the vertical position specified by the
arrows on the package.
INtrodUctIoN
the technical documentation supplied is an inte-
gral part of the equipment and should be kept with
the unit at all times for future reference.
Before starting to install and use the machine, it is ne-
cessary to carefully read and understand the content of
the documentation since it can supply important infor-
mation on installation safety, utilization rules and mainte-
nance operations.
the manual is divided into three chapters.
the first chapter is intended to describe the ordinary
filling and cleaning operations that shall be carried out
in areas of the machine that can be accessed with the
simple use of the door key, without using any other tool.
the second chapter contains the instructions for cor-
rect installation as well as the information necessary for
optimal utilization of the machine performance.
the third chapter is intended to describe the mainte-
nance operations involving the use of tools for access to
potentially dangerous areas.
the operations described in the second and third
chapter must be carried out only by the person-
nel who have a specific knowledge of the machine
operation from the point of view of electric safety
and health rules.
IdENtIFIcatIoN oF tHE macHINE aNd
ItS FEatUrES
Every single machine is identified by a specific serial
number that can be found on the rating plate arranged
inside on the right side.
The plate (see figure) is the only one recognized by the
manufacturer and it contains all the data that enable the
manufacturer to supply technical information of any kind
in a quick and safe manner and to facilitate the manage-
ment of spare parts.
Boiler data
Absorbed power
Operating voltage
Model
Product code
Water system features rete idrica
Current
Frequency
Serial no.
Type
Fig. 1