N&W Global Vending Kobalto Installation Operation & Maintenance - page 53
© by N&W GLOBAL VENDING S.p.A.
49
05-2008 3235-00
mENU SUmmarY
The machine can work in 3 different operation states:
- N
ormal
opEraTioN
moDE
;
- f
illEr
mENu
;
- T
EcHNiciaN
mENu
.
N
ormal
opEraTioN
moDE
If enabled in the programming menu, some operations
can be directly performed when the door is closed by
entering a password (5 keys are pressed in sequence)
after having pressed the washing key
for over two
seconds (or the
key if
is not available).
NaVIgatIoN
to be able to access the programming menu, press the
programming button on the inner side of the door..
now, the machine is set to the Filler Menu mode.
press the key to move from the technician Menu to
the Filler Menu and vice versa.
to move inside the menus, use the keys shown by the
figure:
s
crolliNg
kEys
aND
press the and scrolling keys to move from one item
to the other one of the programming menus on the same
level and to change the enable status and the numeric
value of the functions.
c
oNfirmaTioN
/
ENTEr
kEy
Press the confirmation / Enter key to move to the lower
level or to confirm a data item you have just entered or
modified.
E
xiT
kEy
press the exit key to move back to the upper level or to
quit a field intended to modify a function. After having
reached the highest Menu level, press this key once
again to move from the technician Menu to the Filler
menu and viceversa.
Fig. 41
Programming button
1-
Fig. 43
Programming button
1-
Fig. 42