N&W Global Vending Koro Prime Espresso Installation, Operation & Maintenance Manual - page 16
© by N&W GLOBAL VENDING S.p.A.
8
01-2016 4875 00
USING THE DISPENSERS OF HOT DRINKS
IN OPEN CANISTERS
(e.g. plastic cups, pottery cups, jugs)
The dispensers of drinks in open canisters may be only
used for selling and dispensing drinks obtained by:
-brewing coffee
-reconstituting instant or freeze-dry packed products.
These products shall be declared as “suitable for auto-
matic dispensing” in open canisters by the manufacturer.
-delivering pasteurised milk or preserved UHT milk, re-
frigerated and aspirated from an external tank. (models
with cappuccinatore only)
Products must be preserved in strict observance of
the manufacturer’s instructions for storage, preser-
vation temperature and pull date.
Dispensed drinks shall be consumed immediately.
Under no circumstance shall they be preserved
and/or packed for later consumption
Any other use shall be considered as improper and thus
potentially dangerous.
CONTROLS AND INFORMATION
The labels including the selections and instructions are
supplied with the machine and they shall be inserted at
the time of the installation. Refer to the selection dose
table.
The controls and information for the user are arranged
outside the door.
The “Programming” button, to access the machine func-
tions, and “mixer wash” button are located inside the
machine on the right side of the button board.
1
2
3
4
5
6
7
8
Fig. 5
1- Lock
2- Display
3- Selection label
4- Selection buttons
5- Dispensing nozzles
6- Cup support
7- Signal float
8- Liquid waste tray