N&W Global Vending Koro Prime Espresso Installation, Operation & Maintenance Manual - page 38
© by N&W GLOBAL VENDING S.p.A.
30
01-2016 4875 00
PROGRAMMING PARAMETERS
c
as
Models with payment system only.
This group of functions is intended to manage all the
parameters relative to the payment systems and sales
prices.
p
ric s
of
s l ctioNs
For every single selection it is possible to set four differ-
ent prices, the operation of which will vary according to
the time bands, if enabled.
Prices can be programmed (from 0 to 65,535) globally
(the same price for all selections) or on a selection basis,
for each one of the 4 time bands.
If you have to sell most products at the same price, it
will be advisable to programme the price globally and
to change the price of the selections having a different
sales price.
t
im
baNDs
Four time bands can be programmed for the sale of
products at different prices.
Time bands can be programmed by hour (from 00 to 23)
and by minute (from 00 to 59) at the start and at the end.
If the start-of-band and end-of-band values are equal to
00.00, the band is disabled.
The time of reference is represented by an internal clock
that can be programmed by:
day/month/year week-day 1-7
and then by
hour/minutes/seconds.
c
oiN
m c aNisms
You can decide which protocols to enable for the pay-
ment systems available and manage the relative func-
tions.
The following payment systems are available:
-Executive
-Validators
-BDV
-MDB
If you choose one of the systems, you can manage its
functions.
x cutiv
The following payment systems are arranged for the
Executive system:
-Standard
-Price Holding
-Coges
-U-Key
-Sida
v
aliDators
When the display is positioned on the “Validat. Lines”
function (line programming) of the “programming” menu,
you can vary the value of the 6 coin lines of the validator
from A to F.
bDv
The BDV protocol menus enable the user to define the
following functions.
t
yp
of
Disp NsiNg
To set the operation mode by multiple or single dispens-
ing. In case of multiple dispensing, the change is not
automatically given at the end of a successful delivery,
but the credit will remain available for further dispensing.
If you press the coin return button, the remaining credit
will be returned if its value is lower than the maximum
change value.
m
aximum
cr Dit
Use this function to define the maximum accepted credit
for inserted coins.
m
aximum
c aNg
You can set a limit on the total amount of the change
the coin mechanism will pay as soon as you press the
change button or after one single dispensing.
The credit exceeding the amount you have programmed
by this function will be cashed.
c
aNg
r fus D
To enable/disable the credit return if no dispensing has
been performed.
If enabled, this function will provide for the return of the
coins even if the first dispensing cycle has not occurred.
If a delivery has failed for any reason whatsoever, the
change will be returned, upon request.