NAIM AV2 Owner's Manual - 10.0 Av2 Operation
20
av2
10.0 av2 operation
10.7
on-screen display
If a Naim vs1 Video Switcher is used with the av2, on screen display (OSD) of command
and status information is available if a suitable video monitor is used. OSD fundamentally
repeats the information shown on the av2 display although the extra space available
enables more comprehensive information to be shown. To select OSD press the remote
handset menu key. The av2 display will show OSD. The remote handset osd key can then
be used to display temporary on-screen information. Navigation around the on screen
display is provided by the handset 2
, 8
,
4 and 6
keys, and select and exit
provided by the enter and clear keys. Control of the av2 via OSD is not accessible from the
front panel (although it can still be controlled conventionally from the front panel).
More! Pressing the osd key will also cause the av2 display to scroll through the
current state of each accessory option.
10.8
accessory functions
The av2 has six accessory functions accessible at all times from the remote handset. The
av2 display or on screen display will temporarily indicate selection or de-selection of these
functions.
Cinema EQ: Cinema EQ provides compensation for the over-emphasised high frequency
sound of some cinema soundtracks. It is selected or disabled by pressing the menu key
followed by the 2 key.
Bass Mix: The Bass Mix option routes sub-woofer channel information additionally to the
main left and right loudspeakers. It is selected or disabled by pressing the menu key
followed by the 1 key. Bass Mix will have no effect if “small” main left and right speakers
are specified.
Mute: The mute key immediately reduces the volume to zero. A second operation of the
mute key restores the volume to its previous level.
More! The volume can also be restored after a mute command by turning the
front panel volume control to zero and then up to a normal listening level.
Display: The disp key switches the av2 display off. When switched off the display will
temporarily flash information when changes are made. A second press of the disp key will
restore the display.
More! The disp key is also used to restore av2 setup defaults. See Section 11.
Midnight: The midn key compresses the signal and reduces the bass content. It can help
reduce disturbance to others from late night listening.
More! Midnight is only available with Dolby Digital programme material.
Standby: The standby key returns the av2 to standby mode. The Naim logo will remain
illuminated and the display will show a single dot.