NanoCam Plus NCP-MIRDVRHD2 User Manual - page 16
16
3.3 Playback Screen
This screen is used to playback photos and videos. To access the
Playback Screen
ensure that the camera is not recording and
short press the
button. This will send the camera to the
Photo Screen
. While in the
Photo Screen
, short press the
button again which will bring you to the
Playback Screen
. In this screen the and buttons are used to cycle through the
recorded videos and photos and the
button is used to play and pause videos. In the
Playback Screen
photos and videos can
also be locked and deleted via the
Playback Screen
. This menu can be accessed by pressing and holding the
button for 2
seconds whilst in the
Playback Screen
.
3.3.1 Deleting Photos and Videos
To delete an unlocked photo or video follow the instructions below.
1.
Navigate to the playback screen using the instructions in the section labelled
Playback Screen
.
2.
In the
Playback Screen
use the and buttons to select the photo or video that you want to delete (if you want to delete
all unlocked photos and videos select any unlocked Photo or Video).
3.
Press and hold the
button for 2 seconds to enter the
Playback Menu
and use the and buttons to select the
Delete setting and press the
button.
4.
Use the
and buttons to select either
Delete all
, which will delete all unlocked photos and videos, or
Delete Current
which will delete the selected photo or video.
5.
Press the
button to confirm the deletion.
Note:
1.
Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.
2.
You will only be able to delete videos that have not been protected by a G Sensor locked recording.
3.
Protected Videos are only able to be deleted by connecting the Micro SD card to a PC and manually deleting the files.
4.
To easily delete all files on the inserted Micro SD Card, please refer to the instructions given in the Format section of this manual.