Northern DVRN960 Series Setup Manual - page 3
3
16CH models:
1
Main Monitor (VGA)
VGA output is offered for connecting to VGA monitors.1280x1024,
1024x768 resolutions recommended for 4:3 aspect monitors.
2
USB 2.0 Port
The USB 2.0 port allows users to connect external USB devices to
the unit, such as a USB ThumbDrive or a USB mouse.
3
Power Jack
Connect the power supply cord shipped with the DVR. Use of other
power supply cords may cause overloading.
4
LAN 10/100/1000M
(RJ-45)
The
DVR
is capable of networking, and it allows the videos to be
viewed over the LAN network or the Internet via internet browsers.
5
Main Monitor (HDMI)
HDMI output is offered for connecting to a HDMI main monitor.
Supports 1080p,720p,1280x1024,1024x768 resolutions.
6
Alarm I/O & RS-485
The DVR provides alarm I/O and RS-485 ports that offer users the
flexibility to connect the unit to other devices.
7
Main Monitor (BNC)
BNC output is offered for connecting to a BNC main monitor.
8
Video Out (BNC)
The same amount of BNC connectors beneath Video In (BNC) are
offered for looping out the video from the specific input.
9
Video In (BNC)
A group of BNC connectors is provided for video input streams from
installed cameras. The number of connectors equals to the number
of channels.
10 Call Monitor (BNC)
BNC connector is provided for connecting to a BNC call monitor.
11 Audio In/Out
An Audio connector is provided for connecting audio input devices
for all channels and an audio ouput device for the Main monitor.