Northern DVRN960 Series Setup Manual - page 5
5
Live Panel Buttons
The functional buttons are displayed in the Live Panel when the mouse pointer moves to the right of
the screen. Refer to the table below for definition of each button.
Item
Icon
Description Item
Icon
Description
Item
Icon
Description
1
Enter
6
Up
11
Esc
2
Left
7
Down
12
Right
3
Mode
8
Freeze
13
Search
4
Play/Stop
9
Sequence
14
Menu
5
Call Monitor
10
Dome Camera
Control
Power On the DVR
Please follow the proper power-on procedures to avoid damaging the DVR.
Connect all necessary components, e.g. monitor, USB mouse, and cameras, before powering
on the DVR.
Check the type of power source before plugging in the power cord to the DVR. The acceptable
power input is between AC110V ~ AC240V.
After the power key on the front panel is blinking, press it to power on the DVR.
Select Viewing Mode:
Press
MODE
repeatedly to select the preferred display mode. The available viewing modes are
full-screen, 4-window, 9-window, and 16-window.
Press
FREEZE
to pause the current viewing image.
NOTE:
9-window viewing mode is only available for 8CH and 16CH models. As for
16-window viewing mode, it is only available for 16CH models.