Northern DVRN960 Series Setup Manual - page 9
9
Basic Playback Operation
Search By Time:
Press
SEARCH
to enter the Search menu.
Move the cursor to
“From”, and press
ENTER
to start playing the recorded video from the
beginning of the database.
Move the cursor to
“End” and press
ENTER
, and the playback will start from the end of the
database.
Move the cursor to
“Select” and press
LEFT
/
RIGHT
keys to choose date / time. Press ENTER
and adjust the values with
UP
/
DOWN
keys. Press
ENTER
again to confirm or
ESC
to abort.
Move the cursor to
Begin Playback
> and press
ENTER
to start playing back recorded video of
the selected time. Press
PLAY/STOP
again to return to live video.
NOTE:
If there is no available recorded video that matches the specified time and date,
the unit starts to playback from the next available video.
Calendar Search:
Press
SEARCH
to enter the Search menu.
Move the cursor to
Calendar Search
> and press
ENTER
, a calendar will show up.
Select any underlined date, which indicates recording data are available. The table on the left
will display available videos of each channel within the selected date.
The videos are classified into four categories:
Normal
,
Motion
,
Alarm In
and
Video Loss
,
shown as four different tabs on the top.
Then select a preferred time from the time bar. Alternatively, specify the values of date / hour /
minute / second under
Select
> on the bottom-right corner.
Move the cursor to
From
> or
End
> and press
ENTER
to indicate the beginning or the end of
the database.
Press
Begin Playback
> and press
ENTER
to start playing back the selected video.
Search by Event:
Press
SEARCH
to enter the Search menu.
To search event video that was recorded on a specific camera: Use
LEFT
/
RIGHT
keys to
move the cursor and press
ENTER
to
select or de-select the channel.
Move the cursor to
Event List
> and press
ENTER
to list the event video of the selected
channels.
The list displays each event by date, time, triggered camera and alarm type. The latest recorded
event video will be listed on the top. To exit the event list, press
ESC
.
Use
UP
/
DOWN
keys to scroll through the Event List. Press the buttons below to see the
previous or next pages of the Event List. Press
ENTER
to playback the selected event video.