Oce im5530 User Functions Manual - page 15

11

1

6

Specify following items as you required.

• TX TYPE — This sets the type of the fax transmission mode.  Press the [MEMORY TX] button to select the 

memory transmission mode or the [DIRECT TX] button to select the direct transmission mode.

• ECM — Select whether enabling or disabling the ECM (Error Correction Mode) to automatically resend any 

portion of the document affected by phone line noise or distortion.  Press the [ON] button to enable the ECM, 

or the [OFF] button to disable the ECM.

• QUALITY TX — Select whether a document is sent in the Quality TX mode. This feature allows to send a doc-

ument at a slower speed than a normal so that the transmission will be less affected by line condition.  Press 

the [ON] button to enable the Quality TX, or [OFF] button to disable the Quality TX.

• LINE SELECT — This cannot be set for this equipment.

• [SUB] — Enter the mailbox number if you want to send originals to the mailbox in the remote fax.

• [SID] — Enter the password to input a document into the mailbox in the remote facsimile.

• [SEP] — Enter the mailbox number if you want to retrieve a document from the mailbox in the remote fax.

• [PWD] — Enter the password to retrieve a document from the mailbox in the remote facsimile.

When you press the [SUB], [SID], [SEP], and [PWD] buttons, the input screen is displayed.  Enter the value using 

the keyboard and digital keys, and press the [ENTER] button to set the entry.

7

Press the [ENTER] button to save option settings.

8

Press the [ENTER] button to register the contact.