Oce im5530 User Functions Manual - 4. Setting Scan Functions

75

3

4. SETTING SCAN FUNCTIONS

You can change the initial setting (default setting) of scan job.

The [SCAN] button in the [USER] menu will be available only when the Scanner Kit is installed, or when 

the Printer/Scanner Kit is installed.

1

Press the [USER FUNCTIONS] button on the control panel to enter the 

User Functions menu.

2

Press the [USER] button, and then press the [SCAN] button on the 

touch panel.

• The SCAN screen is displayed.

3

Specify the following items as you require.

• In the “SINGLE/2-SIDE SCAN” option, press the desired mode button.

[SINGLE] — Press this to set single page scan as default scan mode.

[BOOK] — Press this to set book scan mode as default scan mode.  This enables to scan both side of origi-

nals in the same direction.

[TABLET] — Press this to set tablet scan mode as default scan mode.  This enables to scan front page in the 

general direction, and scan back page rotated 180 degree.

• In the “ROTATION” option, press the desired mode button.

[0 degree] — Press this not to rotate the scanned image as default.

[90 degree right] — Press this to rotate the scanned image 90 degree on the right as default.

[180 degree] — Press this to rotate the scanned image 180 degree as default.

[90 degree left] — Press this to rotate the scanned image 90 degrees on the left as default.

• In the “ORIGINAL MODE” option, press the desired mode button applied for scans.

• In the “RESOLUTION” option, press the desired mode button applied for scans.