Oce im5530 User Functions Manual - 3. Setting Fax Functions

73

3

3. SETTING FAX FUNCTIONS

You can change the initial setting (default setting) of fax and Internet Fax features.

The [FAX] button in the [USER] menu will be available only when the Scanner Kit or Printer/Scanner Kit is 

installed, or when the optional Fax unit is installed.

1

Press the [USER FUNCTIONS] button on the control panel to enter the 

User Functions menu.

2

Press the [USER] button, and then press the [FAX] button on the 

touch panel.

• The FAX screen is displayed.

3

Specify the following items as you require.

• In the “RESOLUTION” option, press the desired mode button.

• In the “ORIGINAL MODE” option, press the desired mode button.

• In the “EXPOSURE” option, press light or dark buttons to specify the default exposure manually, or press the 

[AUTO] button to select auto mode for the default exposure mode.

• In the “TX TYPE” option, press the desired mode button.

[MEMORY TX] — Press this to set the Memory TX mode as default transmission mode that will send after 

scanning and saving all originals in the memory.  This mode enables multi-address transmission.

[DIRECT TX] — Press this to set the Direct TX mode as default transmission mode that will send originals 

page by page after every original has been scanned.  This mode disables multi-address transmission.

The “TX TYPE” option is available only when the optional Fax unit is installed.

4

Press the [Next] button to display the next screen.