Oki B6100n Installation Instructions

(continued on back)

Caution!

To avoid damage by static electricity 

or rough handling, keep the memory 

card in its packaging until you're 

ready to install it.

Note:

The printer has two slots in 

which to install an optional 

RAM Memory card.

1. Turn off the printer, and remove the 

power cord and interface cable.

2. Loosen the thumbscrews at the top 

and bottom of the left side cover.

3. Slide the cover toward the rear of 

the printer and then downward to 

remove it.

4. Locate the slot for the card: 

Caution!

To avoid damage to the RAM card, 

ground yourself (touch metal) before 

handling it.

5. Remove the RAM memory card 

from its packaging.

6. Hold the card with the components 

facing up, and the gold contact 

edge aimed away from you. 

7. Insert the card in the slot and press  

firmly into place. Push the white 

tabs against the sides of the card to 

lock it in place.

8. Replace the side cover:

a. Insert the top part of the left side 

cover into the printer. Make sure 

the locking tab aligns with the 

hole in the printer’s side.

b. Slide the side cover towards the 

front of the printer to install it

c. Tighten both thumbscrews.

9. Reattach the interface cord and 

power cable, then turn on the 

printer.

256 MB RAM Memory Expansion 

Option for B6100

Installation Instructions

Oki Data Americas, Inc., 2000 Bishops Gate Blvd., Mt. Laurel, NJ 08054-4620

Phone: (856) 235-2600 Fax: (856) 222-5320 http://www.okidata.com http://my.okidata.com

Memory Part Number 

70045801