Oki C5150n Install Manual - Set Up The Network
3
(continued on next page)
Windows TCP/IP Network Installation: C5150n & C5200ne
Software
Set Up the Network
Print the Menu Map
This will provide information on the printer’s IP Address
which is needed to set the printer up on the network.
□
With the printer turned on, press
+
.
□
Press
ENTER
.
□
Press
ENTER
.
The MenuMap prints.
□
Look for the IP Address under TCP/IP Configuration.
Run The Admin Mgr / Quick Setup
Utility
Use this utility to allow various computers on the network
access to the printer.
□
Insert the Drivers CD supplied with your printer in the
CD-ROM drive. The CD will autorun. (If it doesn’t,
click Start
→ Run → Browse. Browse to your
CD-ROM drive, double-click Install.exe, click OK.)
□
The License Agreement appears, click Next.
□
Select your language.
□
The Menu Installer Software Installation dialog box
appears. Click the Productivity Software button.
□
Click the Admin Mgr / Quick Setup button.
□
The OkiLAN 8100e Softnic Setup Utility dialog box
appears. Select your language.
□
Select from the following buttons:
•
Please read before using: Readme file containing
information and instructions for this utility.
•
OkiLAN 8100e Softnic Standard Setup: if you
are experienced in network setup and want access
to all the setting options, click this button and
follow the on-screen instructions for completing
the installation.
•
OkiLAN 8100e Softnic Quick Setup: This setup
is for less experienced users and does not provide
as many setting options as the Standard Setup. To
use Quick Setup, click this button and follow the
steps below.
□
The Welcome dialog box appears. Click Next.
□
If the Ethernet Address information does not
automatically appear, click Search.
□
Click the Ethernet information displayed, then click
Next.
□
Select Yes for TCP/IP protocol and click Next.
□
Select Obtain an IP Address automatically, then click
Next.
□
Select No for NetBEUI protocol, then click Next.
□
Click Execute.
□
Click Finish.
□
Click the Exit button, then click Yes to confirm that you
are exiting the setup utility.
□
Click the Back button.
Install the Driver
□
With the Driver CD in your CD-ROM driver and the
Menu Installer Software Installation dialog box
displayed, click the Printer Driver Installer button.
□
The Local or network printer dialog box appears.
Select Network printer, then click Next.
□
The Connection type dialog box appears. Select
Directly to the network using TCP/IP and click Next.
□
The TCP/IP Connection dialog box appears.
□
Follow the on-screen instructions to complete the
installation.