Oki C7300 Series Installation Instructions - Continued
Continued
58364501
3. Place the print media in the tray.
4. Gently push back in the tray.
5. Set the Media Weight. You can use
standard, recycled or matte photo
paper up to 47 lb. US Bond in the
auxiliary trays. The default setting
is Medium (20 to 24 lb. US Bond).
If you will be using lighter or
heavier paper in the auxiliary trays,
enter the printer menu and set the
media weight for the trays.
a. Press MENU repeatedly until
MEDIA MENU appears on the
display.
b. Press ITEM + repeatedly until
you see TRAY2 MEDIA-
WEIGHT on the display.
c. Press VALUE + or VALUE -
repeatedly until the desired set-
ting appears on the second line
of the display.
d. Press SELECT to engage the
new setting.
e. If you installed two trays, go
back to step b and repeat the
process for TRAY3 MEDIA-
WEIGHT.
f. Press ON LINE to exit the
menu.
P
HASE
3: A
CTIVATE
THE
A
UXILIARY
T
RAYS
IN
THE
P
RINTER
D
RIVER
Windows® PCL Driver
1. Click
Start — Settings —
Printers
. The Printers dialog box
opens.
2. Right click the OKI C7100, 7300 or
C7500 PCL printer icon, then click
Printing Preferences
(Windows
2000),
Properties
(Windows XP,
NT, Me, 98, 95).
3. Click the
Device
Options
tab.
4. At
Available Tray
, set the total
number of trays installed (Tray1 +
auxiliary trays), then click
OK
.
5. Click
OK
, then close the Printers
dialog box.
Windows PostScript® Driver
1. Click
Start — Settings —
Printers
. The Printers dialog box
opens.
2. Right click the OKI C7100, C7300
or C7500 PostScript printer icon,
then click
Properties
.
3. Click the
Device Settings
tab
(Windows XP, 2000 and NT 4.0) or
the
Device Options
tab (Windows
Me, 98, 95).
4. Under
Installable Options
, click
Available Tray
(or
Additional
Trays
) and select the number of
auxiliary trays installed.
5. Click
OK
, then close the Printers
dialog box.
Macintosh® Driver (OSX)
1. As of OS 10.1.5, Apple has not
enabled Printer Options
adjustment. Therefore, this
selection is unavailable.
Macintosh® PostScript Driver
1. Activate
Chooser
from the Apple
menu.
2. Select
LaserWriter 8
.
3. Click
Printer — Setup
.
4. Click
Configure
.
5. Change the
Available Tray
setting
to match the number of auxiliary
trays installed.
6. Click
OK
twice.
7. Close
Chooser
.