1. DL manuals
  2. Oki
  3. Printer
  4. C9600 Series
  5. User Manual

Oki C9600 Series User Manual

Summary of C9600 Series

  • Page 2

    C9600 user’s guide 2 copyright information copyright © 2007 by oki data. All rights reserved document information ________________________________ c9600 user’s guide p/n 59372901 revision 3.0 february, 2007 disclaimer__________________________________________ every effort has been made to ensure tha...

  • Page 3

    C9600 user’s guide> 3 c ontents notes, cautions and warnings! . . . . . . . . . . . . . . . . 6 safety warnings . . . . . . . . . . . . . . . . . . . . . . . . . . 6 introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 features . . . . . . . . . . . . . . . . . . . . . . . . . ....

  • Page 4

    C9600 user’s guide> 4 connecting the parallel interface . . . . . . . . . . . 45 connecting the usb interface . . . . . . . . . . . . . 45 connecting the network interface . . . . . . . . . . 46 using the drivers cd . . . . . . . . . . . . . . . . . . . . . 47 operation . . . . . . . . . . . . . . ....

  • Page 5

    C9600 user’s guide> 5 appendix b – menu system . . . . . . . . . . . . . . . . 104 configuration. . . . . . . . . . . . . . . . . . . . . . . . . . .105 print page count . . . . . . . . . . . . . . . . . . . . . .105 finisher count . . . . . . . . . . . . . . . . . . . . . . . .105 supplies life . ....

  • Page 6

    C9600 user’s guide> 6 n otes , cautions and warnings ! Note a note provides additional information to supplement the main text. S afety warnings please be careful to read and understand the safety warnings on the following pages before operating the printer. Caution! A caution provides additional in...

  • Page 7

    C9600 user’s guide> 7 warning! Ensure all warning and instruction labels on the product are read, understood and followed in order to prevent any risk of injury. Ensure this and all other documentation is both read carefully and retained for future reference. This printer unit weighs 72kg. 3 people ...

  • Page 8

    C9600 user’s guide> 8 warning! This product has an earthed plug as a safety feature and will only connect to an earthed socket. Do not attempt to defeat the earthing or there is a risk of fire or shock. If using an extension cable or power strip ensure that the total current rating (amperes) of all ...

  • Page 9

    C9600 user’s guide> 9 warning! Use only the power cable supplied. Using a power cable not intended for this product may lead to fire or electric shock. To avoid risk of fire and electric shock, do not use the power cable supplied with this product for any other electrical equipment. If you do not co...

  • Page 10

    C9600 user’s guide> 10 warning! If any liquid (for example water) is allowed to enter the printer, there is a risk of fire. Unplug the mains connector and contact your dealer. Do not place containers containing liquid on the printer as electric shock, fire and/or injuries may occur. If any foreign o...

  • Page 11

    C9600 user’s guide> 11 warning! Risk of explosion if battery is replaced by an incorrect type. Do not touch the battery. Printer battery should not require replacement during the life of the printer. After installing additional memory or a hard disk drive, the cover door must be closed and secured t...

  • Page 12

    C9600 user’s guide> 12 i ntroduction congratulations on buying an oki color printer. Your new printer is designed with advanced features to give you clear, vibrant color prints and crisp black and white pages at high speed on a range of print media for the office. There are four different models ava...

  • Page 13

    C9600 user’s guide> 13 additionally, the following optional features are available: > automatic two-sided (duplex) printing for economical use of paper and compact printing of larger documents note this optional feature is only applicable to the c9600n. > hard disk drive enables spooled and verified...

  • Page 14

    C9600 user’s guide> 14 a bout this guide note images used in this manual may include optional features that your printer does not have installed. This manual is your user’s guide (check the web site, my.Okidata.Com, for the most up-to-date version) for your printer and forms part of the overall user...

  • Page 15

    C9600 user’s guide> 15 o nline usage this guide is intended to be read on screen using an adobe acrobat reader. Use the navigation and viewing tools provided in acrobat. You can access specific information in two ways: > in the list of bookmarks down the left hand side of your screen, click on the t...

  • Page 16

    C9600 user’s guide> 16 (c) [pages from] and [to], (3), for the range of pages you specify by entering their page numbers. 3. Click on [ok]..

  • Page 17

    C9600 user’s guide> 17 p rinter and paper overview o pening and closing the top cover to open the top cover, squeeze the top cover handle (1) to release the catch and raise the cover. To close the top cover, push gently (1) until the cover stops midway and then push harder (2) to close the cover com...

  • Page 18

    C9600 user’s guide> 18 i dentifying major components the major components of your printer are identified in the graphics below. 1. Paper holding arm 2. Top cover (face-down stacker) 3. Mp tray (multi-purpose tray) 4. Tray 1 side cover 5. Paper size label 6. Paper gauge 7. Tray 1 (paper tray) 8. Cont...

  • Page 19

    C9600 user’s guide> 19 10. Face-down stacker 11. Power (on/off) switch 12. Face-up stacker 10 11 12.

  • Page 20

    C9600 user’s guide> 20 13. Interface unit 14. Network interface connector 15. Parallel interface connector 16. Usb interface connector 17. Power connector 18. Ventilation openings 13 17 18 14 15 16.

  • Page 21

    C9600 user’s guide> 21 19. Image drum cartridge and toner cartridge (cyan) 20. Image drum cartridge and toner cartridge (magenta) 21. Image drum cartridge and toner cartridge (yellow) 22. Image drum cartridge and toner cartridge (black) 23. Toner cartridge 24. Image drum cartridge 25. Fuser unit 26....

  • Page 22

    C9600 user’s guide> 22 27. Belt unit 28. Drum basket handle 29. Drum basket s oftware supplied cds: > drivers contains drivers, utilities and network software. > documentation contains documentation in electronic form to describe how to use the printer for day-to-day tasks. > monaco software contain...

  • Page 23

    C9600 user’s guide> 23 p aper recommendations your printer will handle a variety of print media, including a range of paper weights and sizes, transparencies and envelopes. This section provides general advice on choice of media, and explains how to use each type. The best performance will be obtain...

  • Page 24

    C9600 user’s guide> 24 p aper input and output information the following table relates paper parameters to input trays (tray 1 to tray 5 (numbering from the top) and mp tray) and to output areas (face-down stacker and face-up stacker). Type size weight input/ output plain paper a3, a3 nobi, a3 wide,...

  • Page 25

    C9600 user’s guide> 25 t rays and stackers t rays 1 to 5 tray 1 is the standard blank paper input tray and can hold up to 530 sheets of 20 lb (75 g/m²) paper. Additional trays, to give a total of five, can be added as an option to give a total tray capacity of 2650 sheets of 20 lb (75 g/m²) paper. I...

  • Page 26

    C9600 user’s guide> 26 f ace - down stacker the face-down stacker on the top of the printer can hold up to 500 sheets of 20 lb (80 g/m²) standard paper, and can handle paper stocks from 17 – 57 lb (64 – 216 g/m²). Pages printed in reading order (page 1 first) will be sorted in reading order (last pa...

  • Page 27

    C9600 user’s guide> 27 t ray and stacker examples l oading t rays 1 to 5 tray 1 is used in the following example. 1. Pull out the tray. 2. Press the paper rear stopper tab (1) and adjust the tab to the required paper size. 3. Fan the paper to be loaded then tap the edges of the stack on a flat surfa...

  • Page 28

    C9600 user’s guide> 28 4. Load the paper (face down and top edge towards the right for letterhead paper), press the tab (2) on the paper guide and adjust the guides (3) for a snug fit to the paper. To avoid paper jams: • do not leave space between the paper and the guides and rear stopper. • do not ...

  • Page 29

    C9600 user’s guide> 29 5. Gently push the tray back into the printer. U sing the mp t ray 1. Squeeze the handle (1) and open the multi-purpose tray. 1.

  • Page 30

    C9600 user’s guide> 30 2. Fold out the paper support section and swivel out the extension supports (2). 3. Adjust the paper guides (3) to the size of the paper being used. 4. Fan the paper to be loaded then tap the edges of the stack on a flat surface to make it flush. 5. Load the paper. • for singl...

  • Page 31

    C9600 user’s guide> 31 the printer. (the duplex unit must be installed for this function.) • envelopes should be loaded face-up with long edge into the printer. Do not select duplex printing on envelopes. • do not leave space between the paper and the guides. • do not exceed the paper capacity of ap...

  • Page 32

    C9600 user’s guide> 32 u sing the stackers face-down stacker when the face-up stacker (1) on the left side of the printer is closed (its normal position), paper is ejected to the face-down stacker on the top of the printer. Face-up stacker the face-up exit path is used for heavy paper (cardstock etc...

  • Page 33

    C9600 user’s guide> 33 2. Flip out the paper support (2). 3. Swivel out the paper support extension (3). 2 3.

  • Page 34

    C9600 user’s guide> 34 c ontrol panel the control panel can be swivelled to 90° (maximum) upwards from its base position (1) as required for ease of use. B uttons and lights the parts of the control panel are identified and briefly explained below: 1. Shutdown/restart button hold down for more than ...

  • Page 35

    C9600 user’s guide> 35 2. Ready light on: indicates ready to print flashing: indicates processing print data off: indicates unable to receive data (offline) 3. Attention light off: indicates normal operation flashing: indicates error(s) present but printing can continue on: indicates error(s) presen...

  • Page 36

    C9600 user’s guide> 36 d isplay p anel messages there are four types of display panel message: > status information > menu (functions) information > configuration information > help information s tatus information status information is associated with three printer states: in the information state, ...

  • Page 37

    C9600 user’s guide> 37 restart). Available to support staff to allow printer configurations and special functions to be set. C onfiguration information configuration information displays printer configuration information such as internal firmware versions. Menu options at each level can be scrolled ...

  • Page 38

    C9600 user’s guide> 38 the steps involved in using the menus are typically as follows: 1. Ensure that the display panel indicates that the printer is ready to print. 2. Enter user menu mode by pressing either the enter button or the up-arrow or down-arrow button and press the latter two repeatedly u...

  • Page 39

    C9600 user’s guide> 39 g etting started this section provides information to help you get started with using your printer. P rinter location check that you have sufficient space for access: > around your printer: 60cm 60cm 20cm 8in 100cm 40in 24in 24in.

  • Page 40

    C9600 user’s guide> 40 > above your printer: t urning o ff /o n t urning o ff no hard disk drive installed 1. If a hard disk drive is not installed, use the on/off switch. 70cm 28in.

  • Page 41

    C9600 user’s guide> 41 hard disk drive installed 1. If your printer has a hard disk drive installed, hold down the shutdown/restart button (1) on the control panel for more than 2 seconds to start the shutdown process. 2. When the display panel shows that you can either turn off or restart the print...

  • Page 42

    C9600 user’s guide> 42 t urning o n note if the display panel shows that you can either turn off or restart the printer, press shutdown/restart to turn on the printer. 1. If the printer is turned off (no power), use the on/off switch to turn on the printer. C hanging the display language to change t...

  • Page 43

    C9600 user’s guide> 43 7. Press the enter button to select language. 8. Press the up-arrow or down-arrow buttons repeatedly until the desired language is highlighted. 9. Press the enter button to select this language. Ensure that an asterisk (*) appears beside the selected language. 10. Press the on...

  • Page 44

    C9600 user’s guide> 44 i nterfaces and connection your printer is equipped with a selection of data interfaces: > parallel – for direct connection to a pc. This port requires a bi-directional (ieee 1284 compliant) parallel cable. > usb – for connection to a pc running windows 98 or above (not window...

  • Page 45

    C9600 user’s guide> 45 c onnecting the parallel interface 1. Turn off the printer and the computer. 2. Connect a parallel cable between the printer and computer. 3. Turn on the printer and then the computer. C onnecting the usb interface do not connect the usb cable at this time. You will be instruc...

  • Page 46

    C9600 user’s guide> 46 c onnecting the network interface 1. Turn off the printer and the computer. 2. Remove the protective cover from the network connector on the printer. 3. Connect an ethernet cable between the printer and an ethernet hub..

  • Page 47

    C9600 user’s guide> 47 4. Turn on the printer and then the computer. If your printer is to be installed as a network printer, please refer to the relevant section in the software installation guide and configuration guide for further details on how to configure the network connection before installi...

  • Page 48

    C9600 user’s guide> 48 o peration u sing the printer for full details of how to use the printer and any optional accessories to print jobs efficiently and effectively, please refer to the printing guide..

  • Page 49

    C9600 user’s guide> 49 c onsumables and maintenance this section explains how to replace consumable and maintenance items when due. As a guide, the life expectancy of these items is: > toner — 15,000 letter pages at 5% coverage. The printer is shipped with sufficient toner for 7,500 letter pages in ...

  • Page 50

    C9600 user’s guide> 50 c onsumable item order information m aintenance item order details item life order number toner, black 15,000 letter pages @ 5% 42918904 toner, cyan 15,000 letter pages @ 5% 42918903 toner, magenta 15,000 letter pages @ 5% 42918902 toner, yellow 15,000 letter pages @ 5% 429189...

  • Page 51

    C9600 user’s guide> 51 r eplacing consumables / maintenance items each consumable or maintenance item comes complete with its own installation details which give full instructions on replacement. You are advised to follow these instructions carefully. C leaning the led heads you are advised to clean...

  • Page 52

    C9600 user’s guide> 52 2. With an led lens cleaner or soft cloth, gently wipe each of the four heads (1). Move the cleaner as shown, using a clean section of the cleaner with each pass. Be careful not to damage the guards (2). 3. Close the top cover. 1 2.

  • Page 53

    C9600 user’s guide> 53 c leaning the paper feed rollers clean the paper feed rollers if paper jams frequently occur. 1. Remove items like a wrist watch or bracelet and follow the correct steps to turn the printer off depending on whether a hard disk drive is installed. 2. Open tray 1 side cover and ...

  • Page 54

    C9600 user’s guide> 54 3. Remove tray 1 completely from the printer. 4. Gaining access through the gap left by tray 1, wipe the 3 paper feed rollers (2) with a soft cloth lightly moistened with water. 5. Replace tray 1. 2.

  • Page 55

    C9600 user’s guide> 55 6. Return the paper guide plate to its original position and close tray 1 side cover. 7. Turn on the printer..

  • Page 56

    C9600 user’s guide> 56 c leaning the printer casing 1. Follow the correct steps to turn the printer off depending on whether a hard disk drive is installed. 2. Wipe the printer surface with a soft cloth moistened sparingly with water or neutral detergent. 3. Use a soft dry cloth to dry the printer s...

  • Page 57

    C9600 user’s guide> 57 4. Turn on the printer. E mptying the punch chip box (p unch unit optional accessory ) when the display panel indicates that the punch chip box is full, empty the box as follows: 1. Operate the finisher lever and move the finisher away from the printer..

  • Page 58

    C9600 user’s guide> 58 2. Pull out the punch chip box, being careful to keep it level so as not to spill any chips. 3. Discard the chips in an appropriate place. 4. Replace the punch chip box carefully into the finisher..

  • Page 59

    C9600 user’s guide> 59 5. Check that the punch chip box has been replaced correctly then move the finisher back into position, being careful not to trap your fingers..

  • Page 60

    C9600 user’s guide> 60 o ptional accessories this section describes optional accessory equipment for your printer. The following accessories are available: > duplex unit (to enable two-sided printing) (c9600n only) > additional ram memory > hard disk drive (required for verified and spooled printing...

  • Page 61

    C9600 user’s guide> 61 a ccessory order information item order number duplex unit 42797201 additional ram memory 128 mb 256 mb 512 mb 70050201 70050301 70050401 hard disk drive 70050501 second, third paper tray 42831301 high capacity feeder (hcf) 42831501 wireless lan card 70050101 finisher: 4-tray ...

  • Page 62

    C9600 user’s guide> 62 i nstalling accessories each accessory (apart from the finisher) comes complete with its own documentation which gives full instructions on installation. You are advised to follow these instructions carefully. After installation, print out a menu map (configuration document) t...

  • Page 63

    C9600 user’s guide> 63 t roubleshooting this section provides information to help you deal with problems that may arise when using the printer. The following paragraphs describe actions to take in the event of a paper jam and how to deal with unsatisfactory print results. Display panel messages abou...

  • Page 64

    C9600 user’s guide> 64 2. Holding it by the tab (2), turn the paper guide outward. 3. Carefully remove the jammed paper. 4. Put the paper guide back into position and close tray 1 side cover. 2.

  • Page 65

    C9600 user’s guide> 65 o pen cover , paper jam , side cover 1. If the mp tray is open, close it so that the side cover (1) is visible. 2. Pull the release lever (2) and pull open the side cover. 1 2.

  • Page 66

    C9600 user’s guide> 66 3. Carefully remove the jammed paper. 4. Close the side cover..

  • Page 67

    C9600 user’s guide> 67 o pen cover , paper jam , top cover 1. Squeeze the top cover handle (1) and open the top cover. 2. Squeeze the basket handle (2) and raise the drum basket. Warning! Be careful not to touch the fuser unit which is hot after printing. 1 2.

  • Page 68

    C9600 user’s guide> 68 3. Carefully remove any paper on the belt. 4. If paper is jammed in the fuser unit, push the lock lever (3) in the direction shown to release the unit. Holding the fuser unit (4) by the handle, lift it out of the printer and place it on a flat surface. Warning! Be careful not ...

  • Page 69

    C9600 user’s guide> 69 5. Pull up the jam release levers (5) and remove the jammed paper. 6. Carefully replace the fuser unit into the printer and turn the lock lever (6) in the direction shown to lock the fuser unit. 5 6.

  • Page 70

    C9600 user’s guide> 70 7. If paper is jammed near the paper exit, open the face-up stacker (7). 8. Open the side cover (paper exit) (8) and remove the jammed paper. 7 8.

  • Page 71

    C9600 user’s guide> 71 9. Close the side cover (paper exit) and then the face-up stacker. 10. Return the image drum basket (9) into position and check it is locked. 9.

  • Page 72

    C9600 user’s guide> 72 11. Close the top cover and ensure it is latched. P aper jams – duplex unit ( if installed ) c heck duplex unit , paper jam 1. If a finisher unit is attached to your printer, operate the lever (1) of the inverter unit to separate the inverter from the printer. 1.

  • Page 73

    C9600 user’s guide> 73 2. Operate the duplex cover release button (2) and open the cover. 3. Carefully remove any jammed paper. 2.

  • Page 74

    C9600 user’s guide> 74 4. Operate the levers (3) and pull out the duplex unit. 5. Holding the front top cover by the grip (4), push it gently inwards and raise it. 3 3 4.

  • Page 75

    C9600 user’s guide> 75 6. Remove any jammed paper. 7. In similar manner, check for and clear any paper jammed under the rear top cover..

  • Page 76

    C9600 user’s guide> 76 8. Replace the two top covers. 9. Raise the front cover of the duplex unit..

  • Page 77

    C9600 user’s guide> 77 10. Push the duplex unit back into position. 11. If you detached a finisher unit to gain access to the duplex unit, replace the finisher unit..

  • Page 78

    C9600 user’s guide> 78 p aper jams – f inisher ( optional accessory ) c heck f inisher , paper jam / paper remains use the help button on the printer control panel to check the number displayed. You will need this to be able to clear the paper jam. The following paragraphs explain what to do for eac...

  • Page 79

    C9600 user’s guide> 79 2. Operate the finisher lever (1) and move the finisher away from the inverter. 3. Open the finisher top cover. 1.

  • Page 80

    C9600 user’s guide> 80 4. Carefully remove any jammed paper. 5. Close the finisher top cover. 6. Move the finisher back into position and connect it to the inverter..

  • Page 81

    C9600 user’s guide> 81 594, 597, 598/ 644, 646 ( paper jam in f inisher ) 1. Operate the finisher lever (1) and move the finisher away from the inverter. 2. Open the finisher front cover (2). 1 2.

  • Page 82

    C9600 user’s guide> 82 3. Continue to turn the lower knob (3) clockwise until any jammed paper is completely ejected. 4. Remove the ejected paper. 5. Close the finisher front cover. 3.

  • Page 83

    C9600 user’s guide> 83 6. Open the finisher right side cover. 7. Carefully remove any jammed paper. 8. Close the finisher right side cover..

  • Page 84

    C9600 user’s guide> 84 9. Move the finisher back into position and connect it to the inverter. 590 ( paper jam in f inisher /p unch unit ) 1. Operate the finisher lever (1) and move the finisher away from the inverter. 1.

  • Page 85

    C9600 user’s guide> 85 2. Move the tab (2) on the right side of the finisher to align it with the mark (3). 3. Open the finisher top cover. 2 3.

  • Page 86

    C9600 user’s guide> 86 4. Carefully remove any jammed paper. 5. Close the finisher top cover. 6. Move the finisher back into position and connect it to the inverter..

  • Page 87

    C9600 user’s guide> 87 c heck i nverter , paper jam 1. Operate the finisher lever (1) and move the finisher away from the inverter. 2. Squeeze the recessed handle (2) and open the left side cover of the inverter. 1 2.

  • Page 88

    C9600 user’s guide> 88 3. Carefully remove any jammed paper. 4. Close the inverter left side cover. 5. Move the finisher back into position and connect it to the inverter..

  • Page 89

    C9600 user’s guide> 89 6. Operate the inverter lever (3) and separate the inverter from the printer. 7. Open the right side door (4) of the inverter. 3 4.

  • Page 90

    C9600 user’s guide> 90 8. Remove any jammed paper. 9. Close the right side door..

  • Page 91

    C9600 user’s guide> 91 10. Move the finisher and inverter back into position and connect to the printer. A voiding paper jams the following table summarizes possible causes of paper jams and suggests ways of avoiding them. Possible cause suggested remedy the printer is not level. Place the printer o...

  • Page 92

    C9600 user’s guide> 92 d ealing with unsatisfactory printing your printer feed roller is dirty. Wipe the roller with a cloth moistened with water. Your printer feed rollers are wearing out. Replace the feed rollers. The media weight or type have been wrongly set. Select the correct printer menu sett...

  • Page 93

    C9600 user’s guide> 93 printing is light. The toner cartridge is not properly seated. Reinstall the toner cartridge. The toner is low. Replace the toner cartridge. The paper is moist. Use paper stored in proper temperature and humidity conditions. The paper is not suitable for the printer. Use recom...

  • Page 94

    C9600 user’s guide> 94 s taple jams – f inisher ( optional accessory ) c heck f inisher , s taple j am when the display indicates a staple jam has occurred, clear the jam as follows: 1. Open the finisher front cover. White area of paper is lightly stained. Paper contains static. Use paper stored in ...

  • Page 95

    C9600 user’s guide> 95 2. Turn the knob in the direction indicated until the colored indicator appears. 3. Remove any paper that awaits stapling in the paper ejection area..

  • Page 96

    C9600 user’s guide> 96 4. Pull out the staple unit. 5. Turn the knob in the direction indicated to move the stapler to the front..

  • Page 97

    C9600 user’s guide> 97 6. Grip both sides of the staple cartridge, pull it up and remove it. 7. Raise the staple cartridge gate. 8. Remove all staples that are emerging from the staple case..

  • Page 98

    C9600 user’s guide> 98 9. Return the staple cartridge gate to its original position. 10. Replace the staple cartridge. 11. Ensure that the staple cartridge is securely installed back into the staple unit then push the staple unit fully home..

  • Page 99

    C9600 user’s guide> 99 12. Close the finisher front cover, being careful not to trap your fingers..

  • Page 100

    C9600 user’s guide> 100 s pecifications item specification dimensions 25.8x24.4x18.2 in (wxdxh) 655x620x462 mm (wxdxh) weight without options, approx. 161 lb (72 kg) print speeds 36 ppm color; 40 ppm monochrome 20 – 28 lb paper resolution 1200 x 600 dpi emulations pcl 5c, pcl xl 2.1, ps, ibm ppr, ep...

  • Page 101

    C9600 user’s guide> 101 operating environment operating: 50 – 90°f/20 – 80%rh off: 32 – 110°f/10 – 90%rh noise level operating: 53dba maximum standby: 40dba maximum power save: 40dba maximum after 30 mins background level item specification.

  • Page 102: A – D

    C9600 user’s guide> 102 a ppendix a – d isplay p anel m essages the display panel messages are intended to be self-explanatory. Representative messages are given as examples below. Message comment ready to print your printer is online and ready to print. Printing tttttt your printer is printing and ...

  • Page 103

    C9600 user’s guide> 103 open cover paper remains tttttt please see help for details additional paper has been detected after a paper jam has been cleared. Open tttttt side cover to check for additional paper. You can access help details by pressing the help button. Check image drum cccccc please see...

  • Page 104: B – M

    C9600 user’s guide> 104 a ppendix b – m enu system the top-level functions menus are: > configuration > print information > print secure job > menus > admin setup > calibration > print statistics the two other special top-level menus are: > boot menu > system maintenance the following tables summari...

  • Page 105

    C9600 user’s guide> 105 c onfiguration p rint p age c ount f inisher c ount item value description color page nnnnnn displays number of color printed pages converted to letter equivalent. Monochrome page nnnnnn displays number of monochrome printed pages converted to letter equivalent. Traym nnnnnn ...

  • Page 106

    C9600 user’s guide> 106 s upplies l ife item value description xxxx drum remaining nnn% displays the remaining life span of the xxxx drum as a percentage where xxxx can be cyan, magenta, yellow, black. Belt remaining nnn% displays the remaining life span of the belt unit as a percentage. Fuser remai...

  • Page 107

    C9600 user’s guide> 107 n etwork item item value description slot1: 100/10 base printer name xxxxxxxxxxxxxxx xxxxxxxxxxxxxxx displays printer name (dns or pnp) in wired network. Short printer name xxxxxxxxxxxxxxx displays printer name (netbeui) in wired network. Ip address xxx.Xxx.Xxx.Xxx displays i...

  • Page 108

    C9600 user’s guide> 108 slot2: wireless (displayed only when wireless lan card installed) printer name xxxxxxxxxxxxxxx xxxxxxxxxxxxxxx displays printer name (dns or pnp) in wireless network. Short printer name xxxxxxxxxxxxxxx displays printer name (netbeui) in wireless network. Ip address xxx.Xxx.Xx...

  • Page 109

    C9600 user’s guide> 109 p aper s ize in t ray s ystem item value description traym where m is in range 1 to 5 (similar arrangement for all trays) executive letter short edge letter long edge legal 14 legal 13.5 tabloid tabloid extra legal 13 a6 a5 a4 short edge a4 long edge a3 a3 nobi a3 wide b5 sho...

  • Page 110

    C9600 user’s guide> 110 c onfiguration example – monochrome pages printed to display the total monochrome pages printed so far (remembering that a duplex page counts as two pages): 1. Ensure that the display panel indicates that the printer is ready to print. 2. Enter menu mode by pressing either th...

  • Page 111

    C9600 user’s guide> 111 p rint i nformation item item description configuration execute prints printer configuration details. Network slot 1: 100/10 base print summary execute prints summary information about the wired network. Print information execute prints full information about the wired networ...

  • Page 112

    C9600 user’s guide> 112 p rint i nformation example – demonstration page to print a printer demo page to demonstrate how your printer prints: 1. Ensure that the display panel indicates that the printer is ready to print. 2. Enter menu mode by pressing either the up-arrow or down-arrow button and pre...

  • Page 113

    C9600 user’s guide> 113 p rint s ecure j ob m enus t ray c onfiguration item value description enter password nnnn enter a password to use secure printing. Not found use a secure printing job (secure job) or a job stored to hdd when printing. When you print a secure document, it is deleted from the ...

  • Page 114

    C9600 user’s guide> 114 traym config, where m is in range 1 to 5 (similar arrangement for all trays) paper size tray size custom sets paper in traym. X dimension 3.9 – 8.3 (a) – 8.5 (l) – 12.9 inch 100 – 210 (a) – 216 (l) – 328 mm sets custom paper width for traym. Sets for the direction perpendicul...

  • Page 115

    C9600 user’s guide> 115 traym config, where m is in range 1 to 5 (similar arrangement for all trays) legal 14 paper legal 14 legal 13.5 sets the length of the legal paper in traym. Change this to legal 13.5 if that is the standard legal size in your country. A5/a6 paper a5/a6 postcard the printer de...

  • Page 116

    C9600 user’s guide> 116 mp tray config paper size a3 nobi a3 wide a3 a4 sht edge a4 long edge (a) a5 a6 b4 b5 short edge b5 long edge legal 14 legal 13.5 tabloid extra tabloid letter sht edge letter long edge (l) executive custom com-9 envelope com-10 envelope monarch envelope dl envelope landscape ...

  • Page 117

    C9600 user’s guide> 117 mp tray config media type plain letterhead transparency labels bond recycled card stock rough glossy envelope user type1 user type2 user type3 user type4 user type5 sets the media type for mp tray. Media weight auto light medium light medium medium heavy heavy ultra heavy 1 u...

  • Page 118

    C9600 user’s guide> 118 s ystem a djust item value description power save time 5 min 15 min 30 min 60 min 240 min sets the period after which power save mode starts. Clearable warning online job when online is selected, you must manually clear the warning by pressing the online button. Change to job...

  • Page 119

    C9600 user’s guide> 119 low toner continue stop sets the printing operation when insufficient toner is detected. Continue : the printer can continue printing while remaining online. Stop : the printer stops printing and goes offline. Jam recovery on off on : continues printing the job, including any...

  • Page 120

    C9600 user’s guide> 120 print position adjust x adjust 0.00 +0.25 – +2.00 -2.00 – -0.25 mm 0.00 +0.01 – +0.08 -0.08 – -0.01 in adjusts the position of the whole printing image (0.25 mm, 0.01 in interval) perpendicular to the direction of paper movement (i.E. Horizontally). Y adjust 0.00 +0.25 – +2.0...

  • Page 121

    C9600 user’s guide> 121 m enus example 1 – t ray 1 transparencies to print on transparencies (accommodated in tray1): 1. Ensure that the display panel indicates that the printer is ready to print. 2. Enter menu mode by pressing either the up-arrow or down-arrow button and press them repeatedly until...

  • Page 122

    C9600 user’s guide> 122 4. Press the up-arrow or down-arrow buttons repeatedly until tray configuration is highlighted. 5. Press the enter button to select this item. 6. Press the up-arrow or down-arrow buttons repeatedly until mp tray config is highlighted. 7. Press the enter button to select this ...

  • Page 123

    C9600 user’s guide> 123 o ki service centers a uthorized s ervice p roviders oki data has over 2,000 local authorized service providers in north and south america. For the most comprehensive, up-to-date listing of oki data authorized service centers: consult our web site at www.Okidata.Com in the u....

  • Page 124

    C9600 user’s guide> 124 index a accessories 60 installing 62 order details 61 arrow buttons 35 b back button 35 c cancel button 35 cleaning feed rollers 53 led heads 51 printer casing 56 clearing paper jams 63 staple jams 94 consumables order details 50 replacing 49 control panel adjusting 34 contro...