Packard Bell Easy DVD Recorder User Manual - page 14
Easy DVD Recorder User's Guide
12
V.Setting up
Connecting to TV
Your
Easy DVD Recorder
supports video connections through composite video, S-Video,
component video, and SCART. Connect the audio/video cables depending on the
specifications of your TV.
If the TV has COMPONENT VIDEO IN jacks (Y, Cb/Pb, Cr/Pr), connect them to the
corresponding jacks on the
Easy DVD Recorder
(recommended).
If the TV has an S-VIDEO IN jack, connect it to the S-VIDEO jack on the
Easy DVD
Recorder.
If the TV has SCART IN jack, connect it to the SCART OUT jack on the
Easy DVD
Recorder.
Connect the LEFT and RIGHT audio out jacks on the
Easy DVD Recorder
to the audio
input jacks that belong to the same jacks group as the video input jack on the TV set (if
applicable).