Panasonic KX-VC300 User Manual - Registering A Local Site
Registering a Local Site
1.
Press
[Menu]
.
•
The Menu screen is displayed.
2.
Use
[
][
]
to select
"Select local site"
and
press
[Enter]
.
•
The select local site screen is displayed.
3.
Use
[
][
]
to select
"Not Registered"
and press
[B]
.
•
The local site settings screen is displayed.
4.
Use
[
][
]
to select the following items for input:
"Connection mode"
: Press
[Enter]
and use
[
]
[
]
to select
"NAT Traversal Mode"
.
"Local site name"
: Enter a name for the local site.
"Max. Bandwidth"
: Press
[Enter]
and use
[
]
[
]
to select the maximum allowed bandwidth to
be used (
512 kbps
,
768 kbps
,
1.0 Mbps
,
1.2 Mbps
,
1.5 Mbps
,
2.0 Mbps
,
2.5 Mbps
,
3.0 Mbps
,
3.5 Mbps
,
4.0 Mbps
,
4.5 Mbps
,
5.0 Mbps
,
5.5 Mbps
,
6.0 Mbps
,
6.5 Mbps
,
7.0 Mbps
,
7.5 Mbps
,
8.0 Mbps
,
8.5 Mbps
,
9.0 Mbps
[default],
10.0 Mbps
).
Note
•
The maximum bandwidth during a video
conference call adjusts to that of the party
that has set the lowest bandwidth for the
maximum bandwidth setting among all
participating parties.
•
You cannot select a value that is higher than
the maximum bandwidth set by the dealer.
For details, contact your dealer.
•
When you make a 3-party video conference
call, select a value of
"1.0 Mbps"
or higher.
Otherwise, the image quality and the sound
quality cannot be guaranteed.
•
When you make a 4-party video conference
call, select a value of
"1.5 Mbps"
or higher.
Otherwise, the image quality and the sound
quality cannot be guaranteed.
"Encryption"
: Use
[
][
]
to select
"ON"
.
Note
•
You cannot have an encrypted video
conference call with a party with different
encryption settings.
"Encryption Key"
: Enter an encryption key (4 to
256 characters [alphanumeric, space, symbols]).
Note
•
&, , comma (,), double quotation mark
(") cannot be entered.
•
While being entered, the characters of the
encryption key are displayed, but once the
settings are saved, all the characters will be
displayed as asterisks (*), and you will no
longer be able to check the encryption key
on the screen. Record the encryption key
beforehand, and store it in a safe location.
•
If the value specified in
"Encryption Key"
does not match the other party’s, the video
conference call will not start even if
encryption is enabled.
•
When the encryption key is displayed as
asterisks (*), pressing
[Y]
deletes the entire
encryption key.
"Video Quality"
: Use
[
][
]
to select between
prioritising smooth movement or image quality for
video.
–
"Motion"
(default): Prioritise smooth
movement.
–
"Sharpness"
: Prioritise image quality.
Note
•
If you are using the KX-VC300,
"Sharpness"
can only be selected after
purchasing an activation key card
(KX-VCS401) to enable sending images in
Full HD resolution. For details, contact your
dealer.
•
If one of the other parties is using an older
software version,
"Motion"
will be selected.
•
If
"Max Resolution"
is set to
"HD"
, and
"Video Quality"
is changed from
"Motion"
to
"Sharpness"
, the setting for
"Max Resolution"
is automatically
changed to
"Auto"
.
Document Version 2012-03
NAT Traversal Service User’s Guide
19
Setting up KX-VC Series NAT Traversal Service