Summary of U-20ME1E81

  • Page 1

    1 general installation manual photovoltaic module hit ○ r vbhnxxxsj25 series vbhnxxxsj40 series thank you for choosing panasonic photovoltaic module hit ○ r . Please read this manual completely before installation or use of hit ○ r . With proper operation and maintenance, hit ○ r will provide you wi...

  • Page 2

    2 safety precautions general information the installation of modules requires a great degree of skill and should only be performed by qualified licensed professionals, including, without limitation, licensed contractors and licensed electricians. Warning all instructions should be read and understoo...

  • Page 3

    3 notes on installation clearance between the roof surface and module frame is required to allow cooling air to circulate around the back of the module. This also allows any condensation or moisture to dissipate. Install modules so that air can circulate between the roof and the module. We recommend...

  • Page 4

    4 if two or more separable connectors are provided, they shall be configured or arranged so that the other and vice-versa will not accept the mating connector for one, if it will result in an improper connection. Connectors between modules must be inserted until they click. Do not put too much stres...

  • Page 5

    5 this manual is believed to be reliable, but does not constitute an expressed and/or implied warranty. Panasonic reserves the right to make changes to the product, specifications, or manual without prior notice. Disposal of old equipment this symbol on the products, and/or accompanying documents me...

  • Page 6

    6 specifications standard models – vbhnxxxsj25 model vbhn245sj25 vbhn240sj25 cell number in series 72 72 rated power, watts (pmax) w 245 240 maximum power voltage (vpm) v 44.3 43.6 maximum power current (ipm) a 5.54 5.51 open circuit voltage (voc) v 53.0 52.4 short circuit current (isc) a 5.86 5.85 ...

  • Page 7

    7 solar module for questions regarding mounting profiles for modules, please contact your local dealer. Module mounting structure rail m6 bolt spring washer m6 nut flat washer figure 2-2 installation b flat washer spring washer installation (reference) figure 2-1 installation a solar module metal cl...

  • Page 8

    8 specifications standard models – vbhnxxxsj40 model vbhn285sj40 cell number in series 88 rated power, watts (pmax) w 285 maximum power voltage (vpm) v 52.0 maximum power current (ipm) a 5.49 open circuit voltage (voc) v 63.5 short circuit current (isc) a 5.91 cell type silicon hetero-junciton* maxi...

  • Page 9

    9 solar module for questions regarding mounting profiles for modules, please contact your local dealer. Module mounting structure rail m8 bolt spring washer m8 nut flat washer figure 6-2 installation b flat washer spring washer installation (reference) figure 6-1 installation a solar module metal cl...