QTek S200 User Manual - page 129
Experiencing Multimedia 129
1
Current time indicator. The time indicator which is displayed on the upper right corner
of the screen tells you the current time.
2
Mode Switching button. Tapping the left/right arrow ( / ) on the screen allows you
to switch the capture mode.
3
Remaining information indicator. The film icon (
) displays the remaining,
available shots of pictures based on current settings.
4
Resolution indicator. The resolution icon ( / / / / ) indicates the current
resolution.
5
Ambience indicator. The ambience icon ( / / / / / ) indicates the current
ambience.
6
Zoom button. Tapping the up/down arrow ( / ) on the screen allows you to zoom
in and zoom out.
7
Self-Time indicator. If the Self-Timer function is enabled, the timer icon ( ) will
appear on the camera screen. When you press the ENTER button or CAMERA button
to capture a still image, it starts to count down, and then captures a still image after the
assigned time (5 seconds or 10 seconds).
8
Camera Settings. Tap the Tool icon ( ) to open the Camera Settings screen. Tap
OK to return to Camera mode.
9
Picture Viewer. Tap the Viewer icon ( ) to view the picture or video in Pictures &
Videos.
10
Previous/Next Template button. In Picture Theme mode, tap the Template Selector
icon ( / ) to display the previous/next sequential template.
11
Exit. Tap the Exit icon ( ) to exit the Camera program.
Use Still Image capture modes
While using Still Image capture modes, such as
Photo, Contacts Picture, Picture Theme,
Sport, and Burst, you can capture still image(s) by pressing CAMERA on the device or
ENTER on the NAVIGATION control. The Still Image capture modes support either BMP or
JPEG format, as specified by you on the Camera Settings screen.
While capturing an image in the Picture Theme capture mode, you can select a preset
template. To view and select from different templates, tap or on the Camera screen.
Depending on the chosen template, one or more photos may need to be taken for the
template.