QTek S200 User Manual - 6.5 Using Wi-Fi
Getting Connected 87
To configure and use a Bluetooth phone as a modem for your device
1.
On your device, tap
Start > Settings > Connections tab > Connections.
2.
Tap
Add a new modem connection.
3.
Enter a name for the connection.
4.
In the
Select a modem list, tap Bluetooth.
5.
Tap
Next.
6.
If the phone appears in the
My Connections list, skip to step 11.
7.
If the phone does not appear in the
My Connections list, tap New Partnership, and
follow the remaining steps.
8.
Select the phone from the list and tap
Next.
9.
Enter a passkey and tap
Next.
10.
Enter the same passkey on the phone and tap
Finish.
11.
In the
My Connections list on your device, select the phone and tap Next.
12.
Enter the phone number to dial for this connection and tap
Next.
13.
Enter the required logon information for this connection and tap
Finish.
6.5 Using Wi-Fi
Wi-Fi provides wireless Internet access over distances of up to 100 meters. To use Wi-Fi
on your device, you need access to a wireless access point of your service provider. When
you are in public places such as in a coffee shop or restaurant, you will need access to their
public wireless access points (also referred to as “hotspots”).
Note
The availability and range of your device’s Wi-Fi signal depends on the number, infrastructure,
and other objects through which the signal passes.
To connect to a Wi-Fi network
1.
Open the
Comm Manager.
2.
Tap the
Wi-Fi button to turn on/off the wireless function. The Wi-Fi icon indicates the
wireless status.
: Wi-Fi is turned on.
: Wi-Fi is turned off.