QTek S200 User Manual - page 83
Getting Connected 83
Connect a Bluetooth hands-free headset
For hands-free phone conversations, you can use a Bluetooth hands-free headset such as a
car kit with your device.
Just like when connecting to any Bluetooth device, you also need to enter a passkey when
connecting to a Bluetooth hands-free headset. The passkey is fixed and cannot be changed
on a Bluetooth headset. Before you connect it with your device, check for the proper passkey
in the manufacturer’s documentation.
To connect a Bluetooth hands-free headset
1.
Make sure that both your device and the Bluetooth headset are turned on and within
close range, and that the headset is discoverable. Refer to the manufacturer’s
documentation to find out how to set the headset in discoverable mode.
2.
Tap
Start > Settings > Connections tab.
3.
Tap
Bluetooth > Devices tab > New Partnership. Your device searches for other
Bluetooth-enabled devices and displays them in the list.
4.
Tap the name of the Bluetooth headset, then tap
Next.
5.
Enter the passkey of the Bluetooth headset, then tap
Next.