QTek S200 User Manual - page 75
Getting Connected 75
6.
Enter the user name and password, only if required.
7.
Tap
Finish.
Notes •
To view help information for any screen, tap the help icon ( ).
•
To modify your connection settings, tap
Manage existing connections on the Connections
screen, and complete the connection wizard.
To set up a dial-up connection to your ISP
When you use your device to dial up to your ISP and connect to the Internet, you will be
billed by the number of minutes that you use.
To establish a dial-up connection on your device, you need the same settings that you
normally use when you dial up from your computer. This includes the ISP server phone
number, your user name and password.
1.
Tap
Start > Settings > Connections tab > Connections.
2.
Under
My ISP, tap Add a new modem connection.
3.
On the Make New Connection screen, enter a name for the connection. In the
Select a
modem list, select Cellular Line.
4.
Tap
Next.
5.
Enter the ISP server phone number, then tap
Next.
6.
Enter your user name, password, and any other information required by your ISP.
7.
Tap
Finish.
To connect to a private network
1.
Obtain the following information from your network administrator:
•
Server phone number
•
User name
•
Password
•
Domain (and other required settings, such as IP address)
2.
Tap
Start > Settings > Connections tab > Connections.
3.
In
My Work Network, follow the instructions for each type of connection.
4.
Complete the connection wizard, then tap
Finish.
Note
To start browsing the Internet or private network, tap
Start > Programs > Internet Explorer.