RabbitLink EG2110 User Manual - page 41
User’s Manual
37
E.4 E-Mail Commands
put
This command sends a binary file to the flash file system on the RabbitLink. There is a time-
out for this command: the data transfer begins no later than 60 seconds after the RabbitLink
senses there is no activity.
NOTE: It is faster and more efficient to transfer all files, including ASCII files,
as binary files.
filename
Identifies the file.
size
The number of bytes in the file being transferred.
mail
The mail command sends an e-mail via the RabbitLink to the specified address.
address
The address to which the e-mail is sent; e.g.
rabbit@warren.com
.
subject
After receiving the mail command, the RabbitLink will accept the next
string as the subject of the e-mail
body
After receiving the subject of the e-mail, the RabbitLink will accept
strings that follow as the body of the e-mail.
ctrl-D
ctrl-D
(0x04) is the end of the e-mail.
set mail from
This command sets the RabbitLink’s e-mail address. The address will be included in the
From line of all e-mail messages sent from the RabbitLink. Any error responses from the
SMTP server will be sent to this address.
name
E-mail address of the RabbitLink; e.g.
rabbit@warren.com
.