RabbitLink EG2110 User Manual - page 7
User’s Manual
3
1.3 Development and Evaluation Tools
The RabbitLink board comes with two program download cables. These cables connect a Rabbit-
based controller to the RabbitLink board. They are functionally identical, differing in physical size
to accommodate different Rabbit-based controllers. The RabbitLink Tool Kit (sold separately from
the RabbitLink board) contains other hardware that may be used with the RabbitLink.
The tool kit contents are:
•
RabbitLink (EG2100) User’s Manual with schematics (this document). A black square indicates
pin 1 of all headers shown in the manual.
•
The programming cable. Connects a PC serial port to the RabbitLink to set up the network
parameters and to download firmware.
•
AC adapter. Supplies power to the RabbitLink. An AC adapter is supplied with tool kits sold in
the North American market. If you are using another power supply, a minimum of 9-24 V DC
at 120 mA is recommended.
•
Plastic enclosure with 4 customer-installable light pipes.
•
Screwdriver.
•
The companion CD. Contains RabbitLink firmware and the RFU.
Figure 1.3.0-1 RabbitLink Development Tools
J1
Pin 1
PROG
DIAG
Programming
Cable
Program Download
Cables
Companion CD
AC Adapter
(North American
kits only)
Screwdriver
Plastic Enclosure
User's Manual
LED Light Pipes